Themabewertung:
  • 1 Bewertung(en) - 5 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Groups Profile und CO
#21
Funzt echt prima, bis auf Sonderzeichen, aber damit kann ich leben. Smile
Habe dafür allerdings die gleiche DB genommen wie für die Standalone. Funktioniert ohne Probleme.
Zitieren
#22
So hab mal die aktuelle Dev runtergeladen und versucht die Gruppen einzustellen.

Damit die Gruppen V2 funzen, muss folgendenes in der OpenSim.ini stehen.

Code:
;# {Enabled} {} {Enable groups?} {true false} false
    ;; Enables the groups module
    Enabled = true

    ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default
    ;; The default module can use a PHP XmlRpc server from the Flotsam project at
    ;; http://code.google.com/p/flotsam/
    ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
    ; Module = Default
    ;; or... use Groups Module V2, which works for standalones and robust grids
    Module = "Groups Module V2"

    ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll}
    StorageProvider = OpenSim.Data.MySQL.dll

    ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector
    ;; Service connectors to the Groups Service as used in the GroupsModule.  Select one as follows:
    ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector
    ;; -- for Simian Groups use SimianGroupsServicesConnector
    ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"
    ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"
    ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"
    ;; Note that the quotes "" around the words are important!
    ServicesConnectorModule = Groups HG Service Connector

    ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local
    ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote
    LocalService = local

    ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}
    ;; URI for the groups services of this grid
    ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
    ;; or http://mygridserver.com:82/Grid/ for SimianGrid
    ;; or http:://mygridserver.com:8003 for robust, V2
    ;; Leave it commented for standalones, V2
    ; GroupsServerURI = ""

    ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {}
    ;; Used for V2 in HG only. For example
    ;; http://mygridserver.com:9000 or http://mygridserver.com:8002
    ;; If you have this set under [Startup], no need to set it here, leave it commented
    ; HomeURI = ""

    ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true
    MessagingEnabled = true

    ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule
    ; MessagingModule = GroupsMessagingModule
    ;; or use V2 for Groups V2
    MessagingModule = "Groups Messaging Module V2"

    ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true
    ;; Enable Group Notices
    NoticesEnabled = true

    ;; This makes the Groups modules very chatty on the console.
    ; DebugEnabled = false

    ;; XmlRpc Security settings.  These must match those set on your backend
    ;; groups service if the service is using these keys
    ; XmlRpcServiceReadKey    = 1234
    ; XmlRpcServiceWriteKey   = 1234

Mein OpenSim läuft als Standalone ..
Zitieren
#23
WAs nun die Profile bei mir angehen, die funzen nicht. Keine Ahnung warum ...

in der Logdatei stehen folgendene Meldungen ..

Code:
2013-07-06 08:44:40,720 ERROR - OpenSim.Region.ClientStack.LindenUDP.LLClientView [LLCLIENTVIEW]: Exeception when handling generic message Die Verbindung mit dem Remoteserver kann nicht hergestellt werden.   bei System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   bei System.Net.HttpWebRequest.GetRequestStream()
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.JsonRpcRequest(OSD& data, String method, String uri, String jsonId) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 1300.
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.PicksRequest(Object sender, String method, List`1 args) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 546.
   bei OpenSim.Region.ClientStack.LindenUDP.LLClientView.HandleGenericMessage(IClientAPI sender, Packet pack) in c:\opensim\osdev\OpenSim\Region\ClientStack\Linden\UDP\LLClientView.cs:Zeile 5737.
2013-07-06 08:44:43,723 ERROR - OpenSim.Region.ClientStack.LindenUDP.LLClientView [LLCLIENTVIEW]: Caught exception while processing OpenMetaverse.Packets.AvatarPropertiesRequestPacket for Bogus Curry, Die Verbindung mit dem Remoteserver kann nicht hergestellt werden.    bei System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   bei System.Net.HttpWebRequest.GetRequestStream()
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.JsonRpcRequest(Object& parameters, String method, String uri, String jsonId) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 1234.
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.GetProfileData(UserProfileProperties& properties, String& message) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 1008.
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.RequestAvatarProperties(IClientAPI remoteClient, UUID avatarID) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 925.
   bei OpenSim.Framework.RequestAvatarProperties.Invoke(IClientAPI remoteClient, UUID avatarID)
   bei OpenSim.Region.ClientStack.LindenUDP.LLClientView.HandleAvatarPropertiesRequest(IClientAPI sender, Packet Pack) in c:\opensim\osdev\OpenSim\Region\ClientStack\Linden\UDP\LLClientView.cs:Zeile 5812.
   bei OpenSim.Region.ClientStack.LindenUDP.LLClientView.ProcessSpecificPacketAsync(Object state) in c:\opensim\osdev\OpenSim\Region\ClientStack\Linden\UDP\LLClientView.cs:Zeile 713.
2013-07-06 08:44:43,736 ERROR - OpenSim.Region.ClientStack.LindenUDP.LLClientView [LLCLIENTVIEW]: Exeception when handling generic message Die Verbindung mit dem Remoteserver kann nicht hergestellt werden.   bei System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   bei System.Net.HttpWebRequest.GetRequestStream()
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.JsonRpcRequest(Object& parameters, String method, String uri, String jsonId) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 1234.
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.NotesRequest(Object sender, String method, List`1 args) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 760.
   bei OpenSim.Region.ClientStack.LindenUDP.LLClientView.HandleGenericMessage(IClientAPI sender, Packet pack) in c:\opensim\osdev\OpenSim\Region\ClientStack\Linden\UDP\LLClientView.cs:Zeile 5737.
2013-07-06 08:44:43,732 ERROR - OpenSim.Region.ClientStack.LindenUDP.LLClientView [LLCLIENTVIEW]: Exeception when handling generic message Die Verbindung mit dem Remoteserver kann nicht hergestellt werden.   bei System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   bei System.Net.HttpWebRequest.GetRequestStream()
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.JsonRpcRequest(OSD& data, String method, String uri, String jsonId) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 1300.
   bei OpenSim.Region.OptionalModules.Avatar.UserProfiles.UserProfileModule.ClassifiedsRequest(Object sender, String method, List`1 args) in c:\opensim\osdev\OpenSim\Region\CoreModules\Avatar\UserProfiles\UserProfileModule.cs:Zeile 314.
   bei OpenSim.Region.ClientStack.LindenUDP.LLClientView.HandleGenericMessage(IClientAPI sender, Packet pack) in c:\opensim\osdev\OpenSim\Region\ClientStack\Linden\UDP\LLClientView.cs:Zeile 5737.

Das seltsame ist, das die in HG funzen, jedenfalls teilweise ..
Zitieren
#24
Bei Gruppen weiß ich nicht ob sie gehen, denke mal er nicht bei Profilen kann ich nur sagen die funzen sehr gut. Du must allerdings eine DB für die Profile in der Ini angeben (bei einer Standalone die StandaloneCommon.ini). Das kann auch die gleiche sein wie für den Simulator selbst.
Bei mir sieht das z.B. so aus:

[UserProfilesService]
LocalServiceModule = "OpenSim.Services.UserProfilesService.dll:UserProfilesService"
Enabled = true

;; Configure this for separate databse
ConnectionString = "Data Source=localhost;Database=CatZones;User ID=xxx(Benutzername);Password=xxx(Passwort);Old Guids=true;"
;Realm = UserProfiles

UserAccountService = OpenSim.Services.UserAccountService.dll:UserAccountService
AuthenticationServiceModule = "OpenSim.Services.AuthenticationService.dllTongueasswordAuthenticationService"
Zitieren
#25
Ich hab die Einstellungen von dir gemacht, leider kommen immer noch die Fehlermeldungen . Hab aber auch die aktuelle DEv Version installiert.

Tja, die Gruppen scheinen bei mir wiederum zu funzen ..

Diese Fehlermeldung kommt schon beim einloggen in der Console ..

Code:
08:09:41 - [LLCLIENTVIEW]: Exeception when handling generic message Die Verbindu
ng mit dem Remoteserver kann nicht hergestellt werden.   bei System.Net.HttpWebR
equest.GetRequestStream(TransportContext& context)
Zitieren
#26
und wie werden die Einstellungen auch so bei einem Grid gemacht ?
Zitieren
#27
Guck am besten dann statt die Standalone eben die Grid inis, OpenSim und Default.ini sollten ja genauso sein. Smile
Zitieren
#28
So,hier mal die RobustHG.ini meines lokalen Testgrids. mysql-passwort natürlich draußen.Wink
Auch die url's müssen aufs eigene Grid geändert werden.

RobustHG.ini
Code:
; * Run
; * $ Robust.exe -inifile Robust.HG.ini
; *

; * Configurations for enabling HG1.5
; *
; * HG1.5 handlers are: OpenSim.Server.Handlers.dll:GatekeeperService
; *                     OpenSim.Server.Handlers.dll:UserAgentService
; * Additional OpenSim.Server.Handlers.dll:AssetServiceConnector and
; *            OpenSim.Server.Handlers.dll:XInventoryInConnector
; * are started in port 8002, outside the firewall
; *
; * The startup section lists all the connectors to start up in this server
; * instance. This may be only one, or it may be the entire server suite.
; * Multiple connectors should be separated by commas.
; *
; * These are the IN connectors the server uses, the in connectors
; * read this config file and load the needed service and database connectors
; *
; * The full syntax of a connector string is:
; * [[<ConfigName>@]<port>/]<dll name>[:<class name>]
; *
[Startup]
  ; Place to create a PID file
  ; If no path if specified then a PID file is not created.
  ; PIDFile = "/tmp/my.pid"

  ; Plugin Registry Location
  ; Set path to directory for plugin registry. Information
  ; about the registered repositories and installed plugins
  ; will be stored here
  ; The Robust.exe process must have R/W access to the location
  RegistryLocation = "."

  ; Modular configurations
  ; Set path to directory for modular ini files...
  ; The Robust.exe process must have R/W access to the location
  ConfigDirectory = "."

[ServiceList]

AssetServiceConnector = "8003/OpenSim.Server.Handlers.dll:AssetServiceConnector"
InventoryInConnector = "8003/OpenSim.Server.Handlers.dll:XInventoryInConnector"
;; Uncomment if you have set up Freeswitch (see [FreeswitchService] below)
;VoiceConnector = "8004/OpenSim.Server.Handlers.dll:FreeswitchServerConnector"
GridServiceConnector = "8003/OpenSim.Server.Handlers.dll:GridServiceConnector"
GridInfoServerInConnector = "8002/OpenSim.Server.Handlers.dll:GridInfoServerInConnector"
AuthenticationServiceConnector = "8003/OpenSim.Server.Handlers.dll:AuthenticationServiceConnector"
OpenIdServerConnector = "8002/OpenSim.Server.Handlers.dll:OpenIdServerConnector"
AvatarServiceConnector = "8003/OpenSim.Server.Handlers.dll:AvatarServiceConnector"
LLLoginServiceInConnector = "8002/OpenSim.Server.Handlers.dll:LLLoginServiceInConnector"
PresenceServiceConnector = "8003/OpenSim.Server.Handlers.dll:PresenceServiceConnector"
UserAccountServiceConnector = "8003/OpenSim.Server.Handlers.dll:UserAccountServiceConnector"
GridUserServiceConnector = "8003/OpenSim.Server.Handlers.dll:GridUserServiceConnector"
FriendsServiceConnector = "8003/OpenSim.Server.Handlers.dll:FriendsServiceConnector"
MapAddServiceConnector = "8003/OpenSim.Server.Handlers.dll:MapAddServiceConnector"
MapGetServiceConnector = "8002/OpenSim.Server.Handlers.dll:MapGetServiceConnector"
;; Uncomment this if you want offline IM to work
OfflineIMServiceConnector = "8003/OpenSim.Addons.OfflineIM.dll:OfflineIMServiceRobustConnector"
;; Uncomment this if you want Groups V2 to work
GroupsServiceConnector = "8003/OpenSim.Addons.Groups.dll:GroupsServiceRobustConnector"

;; Additions for Hypergrid

GatekeeperServiceInConnector = "8002/OpenSim.Server.Handlers.dll:GatekeeperServiceInConnector"
UserAgentServerConnector = "8002/OpenSim.Server.Handlers.dll:UserAgentServerConnector"
HeloServiceInConnector = "8002/OpenSim.Server.Handlers.dll:HeloServiceInConnector"
HGFriendsServerConnector = "8002/OpenSim.Server.Handlers.dll:HGFriendsServerConnector"
InstantMessageServerConnector = "8002/OpenSim.Server.Handlers.dll:InstantMessageServerConnector"
HGInventoryServiceConnector = "HGInventoryService@8002/OpenSim.Server.Handlers.dll:XInventoryInConnector"
HGAssetServiceConnector = "HGAssetService@8002/OpenSim.Server.Handlers.dll:AssetServiceConnector"
;; Uncomment this if you want Groups V2, HG to work
HGGroupsServiceConnector = "8002/OpenSim.Addons.Groups.dll:HGGroupsServiceRobustConnector"
;; Additions for other add-on modules. For example:
;; WifiServerConnector = "8002/Diva.Wifi.dll:WifiServerConnector"

;; Uncomment for UserProfiles see [UserProfilesService] to configure...
UserProfilesServiceConnector = "8002/OpenSim.Server.Handlers.dll:UserProfilesConnector"

; * This is common for all services, it's the network setup for the entire
; * server instance, if none is specified above
; *
[Network]
    port = 8003

    ; HTTPS for "Out of band" management applications such as the remote admin
    ; module. May specify https_main = True to make the main http server
    ; use https or "False" to make the main server HTTP
    ; https_main = False
    ;
    ; Create https_listener = "True" will create a listener on the port
    ; specified. Provide the path to your server certificate along with it's
    ; password
    ; https_listener = False
    ;
    ; Set our listener to this port
    ; https_port = 0
    ;
    ; Path to X509 certificate
    ; cert_path = "path/to/cert.p12"
    ;
    ; Password for cert
    ; cert_pass = "password"


; * The following are for the remote console
; * They have no effect for the local or basic console types
; * Leave commented to diable logins to the console
;ConsoleUser = Test
;ConsolePass = secret
;ConsolePort = 0

[Hypergrid]
    ;# {HomeURI} {Hypergrid} {The Home URL of this world} {}
    ;; This is the address of the external robust server that
    ;; runs the UserAgentsService, possibly this server.
    ;; For example http://myworld.com:8002
    ;; This is a default that can be overwritten in some sections.
     HomeURI = "http://dorenas-testworld.no-ip.biz:8002"

    ;# {GatekeeperURI} {Hypergrid} {The URL of the gatekeeper of this world} {}
    ;; This is the address of the external robust server
    ;; that runs the Gatekeeper service, possibly this server.
    ;; For example http://myworld.com:8002
    ;; This is a default that can be overwritten in some sections.
     GatekeeperURI = "http://dorenas-testworld.no-ip.biz:8002"

[DatabaseService]
    StorageProvider = "OpenSim.Data.MySQL.dll"
    ConnectionString = "Data Source=localhost;Database=opensim;User ID=opensim;Password=xxxxx;Old Guids=true;"

; * As an example, the below configuration precisely mimicks the legacy
; * asset server. It is read by the asset IN connector (defined above)
; * and it then loads the OUT connector (a local database module). That,
; * in turn, reads the asset loader and database connection information
; *
[AssetService]
    LocalServiceModule = "OpenSim.Services.AssetService.dll:AssetService"
    DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
    AssetLoaderArgs = "./assets/AssetSets.xml"

; * This configuration loads the inventory server modules. It duplicates
; * the function of the legacy inventory server
; *
[InventoryService]
    LocalServiceModule = "OpenSim.Services.InventoryService.dll:XInventoryService"

; * This is the new style grid service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "regions", which uses the legacy tables
; *
[GridService]
    LocalServiceModule = "OpenSim.Services.GridService.dll:GridService"

    HypergridLinker = true

    ; Realm = "regions"
    ; AllowDuplicateNames = "True"

    ;; Perform distance check for the creation of a linked region
    ; Check4096 = "True"

    ;; Needed to display non-default map tile images for linked regions
    AssetService = "OpenSim.Services.AssetService.dll:AssetService"

    ;; Directory for map tile images of linked regions
     MapTileDirectory = "./maptiles"

    ;; Next, we can specify properties of regions, including default and fallback regions
    ;; The syntax is: Region_<RegionName> = "<flags>"
    ;; or:            Region_<RegionID> = "<flags>"
    ;; where <flags> can be DefaultRegion, DefaultHGRegion, FallbackRegion, NoDirectLogin, Persistent, LockedOut, Reservation, NoMove, Authenticate
    ;;  
    ;; DefaultRegion    If a local login cannot be placed in the required region (e.g. home region does not exist, avatar is not allowed entry, etc.)
    ;;                  then this region becomes the destination.  Only the first online default region will be used.  If no DefaultHGRegion
    ;;                  is specified then this will also be used as the region for hypergrid connections that require it (commonly because they have not specified
    ;;                  an explicit region.
    ;;  
    ;; DefaultHGRegion  If an avatar connecting via the hypergrid does not specify a region, then they are placed here.  Only the first online
    ;;                  region will be used.
    ;;  
    ;; FallbackRegion   If the DefaultRegion is not available for a local login, then any FallbackRegions are tried instead.  These are tried in the
    ;;                  order specified.  This only applies to local logins at this time, not Hypergrid connections.
    ;;  
    ;; NoDirectLogin    A hypergrid user cannot directly connect to this region.  This does not apply to local logins.
    ;;  
    ;; Persistent       When the simulator is shutdown, the region is signalled as offline but left registered on the grid.
    ;;
     Region_Doretest = "DefaultRegion, FallbackRegion"
    ; (replace spaces with underscore)

    ;; Allow Hyperlinks to be created at the console
    HypergridLinker = true

    ;; If you have this set under [Hypergrid], no need to set it here, leave it commented
     GatekeeperURI = "http://dorenas-testworld.no-ip.biz:8002"


; * This is the configuration for the freeswitch server in grid mode
[FreeswitchService]
    LocalServiceModule = "OpenSim.Services.FreeswitchService.dll:FreeswitchService"

    ;; The IP address of your FreeSWITCH server.
    ;; This address must be reachable by viewers.
    ; ServerAddress = 127.0.0.1

    ;; The following configuration parameters are optional

    ;; By default, this is the same as the ServerAddress
    ; Realm = 127.0.0.1

    ;; By default, this is the same as the ServerAddress on port 5060
    ; SIPProxy = 127.0.0.1:5060

    ;; Default is 5000ms
    ; DefaultTimeout = 5000

    ;; The dial plan context.  Default is "default"
    ; Context = default

    ;; Currently unused
    ; UserName = freeswitch

    ;; Currently unused
    ; Password = password

    ;; The following parameters are for STUN = Simple Traversal of UDP through NATs
    ;; See http://wiki.freeswitch.org/wiki/NAT_Traversal
    ;; stun.freeswitch.org is not guaranteed to be running so use it in
    ;; production at your own risk    
    ; EchoServer = 127.0.0.1
    ; EchoPort = 50505
    ; AttemptSTUN = false

; * This is the new style authentication service. Currently, only MySQL
; * is implemented.
; *
[AuthenticationService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
    ; Realm = "useraccounts"

    ;; Allow the service to process HTTP getauthinfo calls.
    ;; Default is false.
    ; AllowGetAuthInfo = false

    ;; Allow the service to process HTTP setauthinfo calls.
    ;; Default is false.
    ; AllowSetAuthInfo = false

    ;; Allow the service to process HTTP setpassword calls.
    ;; Default is false.
    ; AllowSetPassword = false

[OpenIdService]
    ; for the server connector
    AuthenticationServiceModule = "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
    UserAccountServiceModule = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    
; * This is the new style user service.
; * "Realm" is the table that is used for user lookup.
; * It defaults to "useraccounts", which uses the new style.
; * Realm = "users" will use the legacy tables as an authentication source
; *
[UserAccountService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    ; Realm = "useraccounts"

    ; These are for creating new accounts by the service
    AuthenticationService = "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
    PresenceService = "OpenSim.Services.PresenceService.dll:PresenceService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    InventoryService = "OpenSim.Services.InventoryService.dll:XInventoryService"
    AvatarService = "OpenSim.Services.AvatarService.dll:AvatarService"

    ;; This switch creates the minimum set of body parts and avatar entries for a viewer 2
    ;; to show a default "Ruth" avatar rather than a cloud for a newly created user.
    ;; Default is false
    CreateDefaultAvatarEntries = true

    ;; Allow the service to process HTTP createuser calls.
    ;; Default is false.
    ; AllowCreateUser = false

    ;; Allow the service to process HTTP setaccount calls.
    ;; Default is false.
    ; AllowSetAccount = false


[GridUserService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.UserAccountService.dll:GridUserService"

[PresenceService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.PresenceService.dll:PresenceService"

[AvatarService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.AvatarService.dll:AvatarService"

[FriendsService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.FriendsService.dll:FriendsService"

[LibraryService]
    LibraryName = "OpenSim Library"
    DefaultLibrary = "./inventory/Libraries.xml"

[LoginService]
    ; for the server connector
    LocalServiceModule = "OpenSim.Services.LLLoginService.dll:LLLoginService"
    ; for the service
    UserAccountService = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    GridUserService = "OpenSim.Services.UserAccountService.dll:GridUserService"
    AuthenticationService = "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"
    InventoryService = "OpenSim.Services.InventoryService.dll:XInventoryService"
    AvatarService = "OpenSim.Services.AvatarService.dll:AvatarService"
    PresenceService = "OpenSim.Services.PresenceService.dll:PresenceService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    SimulationService ="OpenSim.Services.Connectors.dll:SimulationServiceConnector"
    LibraryService = "OpenSim.Services.InventoryService.dll:LibraryService"
    UserAgentService = "OpenSim.Services.HypergridService.dll:UserAgentService"
    FriendsService = "OpenSim.Services.FriendsService.dll:FriendsService"

    ;; Ask co-operative viewers to use a different currency name
    ;Currency = ""

    ;; Set minimum fee to publish classified
    ; ClassifiedFee = 0

    WelcomeMessage = "Welcome, Avatar!"
    AllowRemoteSetLoginLevel = "false"

    ; For V2 map
    MapTileURL = "http://dorenas-testworld.no-ip.biz:8002";

    ; For V2/3 Web Profiles
    ; Work in progress: The ProfileServerURL/OpenIDServerURL are
    ; being used in a development viewer as support for webprofiles
    ; is being developed across the componets
    ;
     ProfileServerURL = "http://dorenas-testworld.no-ip.biz/profiles/[AGENT_NAME]"
    ;
    ; For V2/V3 webapp authentication SSO
    ; OpenIDServerURL = "http://127.0.0.1/openid/openidserver/"

    ; For V3 destination guide
    ; DestinationGuide = "http://127.0.0.1/guide"

    ; For V3 avatar picker (( work in progress ))
    ; AvatarPicker = "http://127.0.0.1/avatars"

    ; If you run this login server behind a proxy, set this to true
    ; HasProxy = false
    
    ; Defaults for the users, if none is specified in the useraccounts table entry (ServiceURLs)
    ;; If you have GatekeeperURI set under [Hypergrid], no need to set it here, leave it commented
     GatekeeperURI = "http://dorenas-testworld.no-ip.biz:8002"

    SRV_HomeURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_InventoryServerURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_AssetServerURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_ProfileServerURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_FriendsServerURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_IMServerURI = "http://dorenas-testworld.no-ip.biz:8002"
    SRV_GroupsServerURI = "http://dorenas-testworld.no-ip.biz:8002:8002"

    ;; Regular expressions for controlling which client versions are accepted/denied.
    ;; An empty string means nothing is checked.
    ;;
    ;; Example 1: allow only these 3 types of clients (any version of them)
    ;; AllowedClients = "Imprudence|Hippo|Second Life"
    ;;
    ;; Example 2: allow all clients except these
    ;; DeniedClients = "Twisted|Crawler|Cryolife|FuckLife|StreetLife|GreenLife|AntiLife|KORE-Phaze|Synlyfe|Purple Second Life|SecondLi |Emerald"
    ;;
    ;; Note that these are regular expressions, so every character counts.
    ;; Also note that this is very weak security and should not be trusted as a reliable means
    ;; for keeping bad clients out; modified clients can fake their identifiers.
    ;;
    ;;
    ;AllowedClients = ""
    ;DeniedClients = ""

    ;# {DSTZone} {} {Override Daylight Saving Time rules} {* none local} "America/Los_Angeles;Pacific Standard Time"
    ;; Viewers do not receive timezone information from the server - almost all (?) default to Pacific Standard Time
    ;; However, they do rely on the server to tell them whether it's Daylight Saving Time or not.
    ;; Hence, calculating DST based on a different timezone can result in a misleading viewer display and inconsistencies between grids.
    ;; By default, this setting uses various timezone names to calculate DST with regards to the viewer's standard PST.
    ;; Options are
    ;;   "none"     no DST
    ;;   "local"    use the server's only timezone to calculate DST.  This is previous OpenSimulator behaviour.
    ;;   "America/Los_Angeles;Pacific Standard Time" use these timezone names to look up Daylight savings.
    ;;      'America/Los_Angeles' is used on Linux/Mac systems whilst 'Pacific Standard Time' is used on Windows
    DSTZone = "America/Los_Angeles;Pacific Standard Time"

[MapImageService]
    LocalServiceModule = "OpenSim.Services.MapImageService.dll:MapImageService"
    ; Set this if you want to change the default
     TilesStoragePath = "maptiles"
    ;
    ; If for some reason you have the AddMapTile service outside the firewall (e.g. 8002),
    ; you may want to set this. Otherwise, don't set it, because it's already protected.
    ; GridService = "OpenSim.Services.GridService.dll:GridService"
    ;
    ; Additionally, if you run this server behind a proxy, set this to true
    ; HasProxy = false

[GridInfoService]
    ; These settings are used to return information on a get_grid_info call.
    ; Client launcher scripts and third-party clients make use of this to
    ; autoconfigure the client and to provide a nice user experience. If you
    ; want to facilitate that, you should configure the settings here according
    ; to your grid or standalone setup.
    ;
    ; See http://opensimulator.org/wiki/GridInfo

    ; login uri: for grid this is the login server URI
    login = http://dorenas-testworld.no-ip.biz:8002/

    ; long grid name: the long name of your grid
    gridname = "Dorenas Testgrid"

    ; short grid name: the short name of your grid
    gridnick = "Testgrid"

    ; login page: optional: if it exists it will be used to tell the client to use
    ;                       this as splash page
    ;welcome = http://127.0.0.1/welcome

    ; helper uri: optional: if it exists if will be used to tell the client to use
    ;                       this for all economy related things
    ;economy = http://127.0.0.1:8002/

    ; web page of grid: optional: page providing further information about your grid
    ;about = http://127.0.0.1/about/

    ; account creation: optional: page providing further information about obtaining
    ;                             a user account on your grid
    ;register = http://127.0.0.1/register

    ; help: optional: page providing further assistance for users of your grid
    ;help = http://127.0.0.1/help

    ; password help: optional: page providing password assistance for users of your grid
    ;password = http://127.0.0.1/password
    
    ; HG address of the gatekeeper, if you have one
    ; this is the entry point for all the regions of the world
    ; gatekeeper = http://127.0.0.1:8002/

    ; HG user domain, if you have one
    ; this is the entry point for all user-related HG services
    ; uas = http://127.0.0.1:8002/

[GatekeeperService]
    LocalServiceModule = "OpenSim.Services.HypergridService.dll:GatekeeperService"
    ;; for the service
    UserAccountService = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    UserAgentService = "OpenSim.Services.HypergridService.dll:UserAgentService"
    PresenceService = "OpenSim.Services.PresenceService.dll:PresenceService"
    GridUserService = "OpenSim.Services.UserAccountService.dll:GridUserService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    AuthenticationService = "OpenSim.Services.Connectors.dll:AuthenticationServicesConnector"
    SimulationService ="OpenSim.Services.Connectors.dll:SimulationServiceConnector"
    ; how does the outside world reach me? This acts as public key too.
    ;; If you have GatekeeperURI set under [Hypergrid], no need to set it here, leave it commented
     ExternalName = "http://dorenas-testworld.no-ip.biz:8002"

    ; Does this grid allow incoming links to any region in it?
    ; If false, HG TPs happen only to the Default regions specified in [GridService] section
    AllowTeleportsToAnyRegion = true
    
    ; If you run this gatekeeper server behind a proxy, set this to true
    ; HasProxy = false

    ;; Regular expressions for controlling which client versions are accepted/denied.
    ;; An empty string means nothing is checked.
    ;;
    ;; Example 1: allow only these 3 types of clients (any version of them)
    ;; AllowedClients = "Imprudence|Hippo|Second Life"
    ;;
    ;; Example 2: allow all clients except these
    ;; DeniedClients = "Twisted|Crawler|Cryolife|FuckLife|StreetLife|GreenLife|AntiLife|KORE-Phaze|Synlyfe|Purple Second Life|SecondLi |Emerald"
    ;;
    ;; Note that these are regular expressions, so every character counts.
    ;; Also note that this is very weak security and should not be trusted as a reliable means
    ;; for keeping bad clients out; modified clients can fake their identifiers.
    ;;
    ;;
    ;AllowedClients = ""
    ;DeniedClients = ""

    ;; Are foreign visitors allowed?
    ;ForeignAgentsAllowed = true
    ;;
    ;; If ForeignAgentsAllowed is true, make exceptions using AllowExcept.
    ;; Leave blank or commented for no exceptions.
    ; AllowExcept = "http://griefer.com:8002, http://enemy.com:8002"
    ;;
    ;; If ForeignAgentsAllowed is false, make exceptions using DisallowExcept
    ;; Leave blank or commented for no exceptions.
    ; DisallowExcept = "http://myfriendgrid.com:8002, http://myboss.com:8002"


[UserAgentService]
    LocalServiceModule = "OpenSim.Services.HypergridService.dll:UserAgentService"
    ;; for the service
    GridUserService = "OpenSim.Services.UserAccountService.dll:GridUserService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    GatekeeperService = "OpenSim.Services.HypergridService.dll:GatekeeperService"
    PresenceService    = "OpenSim.Services.PresenceService.dll:PresenceService"
    FriendsService    = "OpenSim.Services.FriendsService.dll:FriendsService"
    UserAccountService = "OpenSim.Services.UserAccountService.dll:UserAccountService"

    ; If you run this user agent server behind a proxy, set this to true
    ; HasProxy = false

    ;; If you separate the UserAgentService from the LoginService, set this to
    ;; the IP address of the machine where your LoginService is
    ;LoginServerIP = "127.0.0.1"

    ; User level required to be contacted from other grids
    ;LevelOutsideContacts = 0

    ;; Restrictions on destinations of local users.
    ;; Are local users allowed to visit other grids?
    ;; What user level? Use variables of this forrm:
    ;; ForeignTripsAllowed_Level_<UserLevel> = true | false
    ;; (the default is true)
    ;; For example:
    ; ForeignTripsAllowed_Level_0 = false
    ; ForeignTripsAllowed_Level_200 = true ; true is default, no need to say it
    ;;
    ;; If ForeignTripsAllowed is false, make exceptions using DisallowExcept
    ;; Leave blank or commented for no exceptions.
    ; DisallowExcept_Level_0 = "http://myothergrid.com:8002, http://boss.com:8002"
    ;;
    ;; If ForeignTripsAllowed is true, make exceptions using AllowExcept.
    ;; Leave blank or commented for no exceptions.
    ; AllowExcept_Level_200 = "http://griefer.com:8002, http://enemy.com:8002"


; * The interface that local users get when they are in other grids.
; * This restricts the inventory operations while in other grids.
; * Still not completely safe, especially if users perform inventory operations
; * while in those grids. The more the user accesses his/her inventory, the more
; * those simulators will know about the user's inventory.
; *
[HGInventoryService]
    ; For the InventoryServiceInConnector
    LocalServiceModule    = "OpenSim.Services.HypergridService.dll:HGSuitcaseInventoryService"
    ;; alternatives:
    ;;  HG1.5, more permissive, not recommended, but still supported
    ;LocalServiceModule    = "OpenSim.Services.HypergridService.dll:HGInventoryService"
    ;;  HG1.0, totally permissive, not recommended, but OK for grids with 100% trust
    ;LocalServiceModule    = "OpenSim.Services.InventoryService.dll:XInventoryService"

    UserAccountsService = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    AvatarService = "OpenSim.Services.AvatarService.dll:AvatarService"

    ;; Can overwrite the default in [Hypergrid], but probably shouldn't
    HomeURI = "http://dorenas-testworld.no-ip.biz:8002"

; * The interface that local users get when they are in other grids.
; * This restricts the access that the rest of the world has to
; * the assets of this world.
; *
[HGAssetService]
    LocalServiceModule = "OpenSim.Services.HypergridService.dll:HGAssetService"
    UserAccountsService = "OpenSim.Services.UserAccountService.dll:UserAccountService"

    ;; Can overwrite the default in [Hypergrid], but probably shouldn't
     HomeURI = "http://dorenas-testworld.no-ip.biz:8002"

    ;; The asset types that this grid can export to / import from other grids.
    ;; Comma separated.
    ;; Valid values are all the asset types in OpenMetaverse.AssetType, namely:
    ;; Unknown, Texture, Sound, CallingCard, Landmark, Clothing, Object, Notecard, LSLText,
    ;; LSLBytecode, TextureTGA, Bodypart, SoundWAV, ImageTGA, ImageJPEG, Animation, Gesture, Mesh
    ;;
    ;; Leave blank or commented if you don't want to apply any restrictions.
    ;; A more strict, but still reasonable, policy may be to disallow the exchange
    ;; of scripts, like so:
    ; DisallowExport ="LSLText"
    ; DisallowImport ="LSLBytecode"

[HGFriendsService]
    LocalServiceModule = "OpenSim.Services.HypergridService.dll:HGFriendsService"
    UserAgentService = "OpenSim.Services.HypergridService.dll:UserAgentService"
    FriendsService = "OpenSim.Services.FriendsService.dll:FriendsService"
    UserAccountService = "OpenSim.Services.UserAccountService.dll:UserAccountService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    PresenceService = "OpenSim.Services.PresenceService.dll:PresenceService"

[HGInstantMessageService]
    LocalServiceModule = "OpenSim.Services.HypergridService.dll:HGInstantMessageService"
    GridService = "OpenSim.Services.GridService.dll:GridService"
    PresenceService    = "OpenSim.Services.PresenceService.dll:PresenceService"
    UserAgentService = "OpenSim.Services.HypergridService.dll:UserAgentService"
    ; This should always be true in the Robust config
    InGatekeeper = True

[Messaging]
    ; OfflineIM
    OfflineIMService = "OpenSim.Addons.OfflineIM.dll:OfflineIMService"

[Groups]
    ;; for the HG Groups service
    OfflineIMService = "OpenSim.Addons.OfflineIM.dll:OfflineIMService"
    UserAccountService = "OpenSim.Services.UserAccountService.dll:UserAccountService"

    ;; What is the HomeURI of users associated with this grid?
    ;; Can overwrite the default in [Hypergrid], but probably shouldn't
    HomeURI = "http://dorenas-testworld.no-ip.biz:8002"

[UserProfilesService]
    LocalServiceModule = "OpenSim.Services.UserProfilesService.dll:UserProfilesService"
    Enabled = true
    ;; Configure this for separate profiles database
     ConnectionString = "Data Source=localhost;Database=opensim;User ID=opensim;Password=xxxxxxx;Old Guids=true;"
    ;; Realm = UserProfiles
    UserAccountService = OpenSim.Services.UserAccountService.dll:UserAccountService
    AuthenticationServiceModule = "OpenSim.Services.AuthenticationService.dll:PasswordAuthenticationService"

Das scheint zuviele Zeilen zu sein, ich poste mal es extra ...
Zitieren
#29
Danke dore ;D Das HG funzt bei mir ;D

Profile gehen auch, bekomme aber bei Picks so komische Fehlermeldungen .. Da schau ich mal ..

@Dore: bei der Opensim.ini ist unten was abgeschnitten worden ..
Zitieren
#30
So hier nochmal die Opensim.ini von der Dorena

Code:
;; This is the main configuration file for OpenSimulator.
;; If it's named OpenSim.ini then it will be loaded by OpenSimulator.
;; If it's named OpenSim.ini.example then you will need to copy it to
;; OpenSim.ini first (if that file does not already exist)
;;
;; If you are copying, then once you have copied OpenSim.ini.example to
;; OpenSim.ini you will need to pick an architecture in the [Architecture]
;; section at the end of this file.
;;
;; The settings in this file are in the form "<key> = <value>".  For example,
;; save_crashes = false in the [Startup] section below.
;;
;; All settings are initially commented out and the default value used, as
;; found in OpenSimDefaults.ini.  To change a setting, first uncomment it by
;; deleting the initial semicolon (;) and then change the value.  This will
;; override the value in OpenSimDefaults.ini
;;
;; If you want to find out what configuration OpenSimulator has finished with
;; once all the configuration files are loaded then type "config show" on the
;; region console command line.
;;
;;
;; NOTES FOR DEVELOPERS REGARDING THE FORMAT OF THIS FILE
;;
;; All leading white space is ignored, but preserved.
;;
;; Double semicolons denote a text comment
;;
;; ;# denotes a configuration directive description
;;    formatted as:
;;    {option} {depends on} {question to ask} {choices} default value
;;    Any text comments following the declaration, up to the next blank line.
;;    will be copied to the generated file (NOTE: generation is not yet
;;    implemented)
;;
;;    A * in the choices list will allow an empty entry.
;;    An empty question will set the default if the dependencies are
;;    satisfied.
;;
;; ;  denotes a commented out option.
;;    Any options added to OpenSim.ini.example should be initially commented
;;    out.


[Startup]
    ;# {ConsolePrompt} {} {ConsolePrompt} {} "Region (\R) "
    ;; Console prompt
    ;; Certain special characters can be used to customize the prompt
    ;; Currently, these are
    ;; \R - substitute region name
    ;; \\ - substitute \
    ; ConsolePrompt = "Region (\R) "

    ;# {save_crashes} {} {Save crashes to disk?} {true false} false
    ;; Set this to true if you want to log crashes to disk
    ;; this can be useful when submitting bug reports.
    ;; However, this will only log crashes within OpenSimulator that cause the
    ;; entire program to exit
    ;; It will not log crashes caused by virtual machine failures, which
    ;; includes mono and ODE failures.
    ;; You will need to capture these native stack traces by recording the
    ;; session log itself.
    ; save_crashes = false

    ;# {crash_dir} {save_crashes:true} {Directory to save crashes to?} {} crashes
    ;; Directory to save crashes to if above is enabled
    ;; (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
    ; crash_dir = "crashes"

    ;# {PIDFile} {} {Path to PID file?} {}
    ;; Place to create a PID file
    ; PIDFile = "/tmp/my.pid"

    ;# {region_info_source} {} {Where to load region from?} {filesystem web} filesystem
    ;; Determine where OpenSimulator looks for the files which tell it
    ;; which regions to server
    ;; Default is "filesystem"
    ; region_info_source = "filesystem"
    ; region_info_source = "web"
    
    ;# {regionload_regionsdir} {region_info_source} {Location of file?} {} Regions
    ;; Determines where the region XML files are stored if you are loading
    ;; these from the filesystem.
    ;; Defaults to bin/Regions in your OpenSimulator installation directory
    ; regionload_regionsdir="C:\somewhere\xmlfiles\"

    ;# {regionload_webserver_url} {region_info_source} {URL to load region from?} {}
    ;; Determines the page from which regions xml is retrieved if you are
    ;; loading these from the web.
    ;; The XML here has the same format as it does on the filesystem
    ;; (including the <Root> tag), except that everything is also enclosed
    ;; in a <Regions> tag.
    ; regionload_webserver_url = "http://example.com/regions.xml";

    ;# {allow_regionless} {} {Allow simulator to start up with no regions configured.} {true false} false
    ;; Allow the simulator to start up if there are no region configuration available
    ;; from the selected region_info_source.
    ; allow_regionless = false

    ;# {MaxPrimUndos} {} {Maximum number of undos avialable for position, rotation and scale changes of each prim} {} 20
    ;; Increasing the number of undos available number will increase memory usage.
    MaxPrimUndos = 20

    ;# {NonPhysicalPrimMin} {} {Minimum size of nonphysical prims?} {} 0.001
    ;; Minimum size for non-physical prims.  Affects resizing of existing
    ;; prims.  This can be overriden in the region config file (as
    ;; NonPhysicalPrimMin!).
    ; NonPhysicalPrimMin = 0.001

    ;# {NonPhysicalPrimMax} {} {Maximum size of nonphysical prims?} {} 256
    ;; Maximum size for non-physical prims.  Affects resizing of existing
    ;; prims. This can be overriden in the region config file (as
    ;; NonPhysicalPrimMax!).
    ; NonPhysicalPrimMax = 256

    ;# {PhysicalPrimMin} {} {Minimum size of physical prims?} {} 10
    ;; Maximum size where a prim can be physical.  Affects resizing of
    ;; existing prims.  This can be overriden in the region config file.
    ; PhysicalPrimMin = 0.01

    ;# {PhysicalPrimMax} {} {Maximum size of physical prims?} {} 10
    ;; Maximum size where a prim can be physical.  Affects resizing of
    ;; existing prims.  This can be overriden in the region config file.
    ; PhysicalPrimMax = 10

    ;# {ClampPrimSize} {} {Clamp viewer rezzed prims to max sizes?} {true false} false
    ;; If a viewer attempts to rez a prim larger than the non-physical or
    ;; physical prim max, clamp the dimensions to the appropriate maximum
    ;; This can be overriden in the region config file.
    ; ClampPrimSize = false
    
    ;# {LinksetPrims} {} {Max prims an object will hold?} {} 0
    ;; Maximum number of prims allowable in a linkset. Affects creating new
    ;; linksets. Ignored if less than or equal to zero.
    ;; This can be overriden in the region config file.
    ; LinksetPrims = 0

    ;# {AllowScriptCrossing} {} {Allow scripts to cross into this region} {true false} true
    ;; Allow scripts to keep running when they cross region boundaries, rather
    ;; than being restarted.  State is reloaded on the destination region.
    ;; This only applies when crossing to a region running in a different
    ;; simulator.  
    ;; For crossings where the regions are on the same simulator the script is
    ;; always kept running.
    ; AllowScriptCrossing = true

    ;# {TrustBinaries} {AllowScriptCrossing:true} {Accept compiled binary script code? (DANGEROUS!)} {true false} false
    ;; Allow compiled script binary code to cross region boundaries.
    ;; If you set this to "true", any region that can teleport to you can
    ;; inject ARBITRARY BINARY CODE into your system. Use at your own risk.
    ;; YOU HAVE BEEN WARNED!!!
    ; TrustBinaries = false

    ;# {CombineContiguousRegions} {} {Create megaregions where possible? (Do not use with existing content!)} {true false} false
    ;; Combine all contiguous regions into one large megaregion
    ;; Order your regions from South to North, West to East in your regions.ini
    ;; and then set this to true
    ;; Warning!  Don't use this with regions that have existing content!,
    ;; This will likely break them
    ; CombineContiguousRegions = false

    ;# {InworldRestartShutsDown} {} {Shutdown instance on region restart?} {true false} false
    ;; If you have only one region in an instance, or to avoid the many bugs
    ;; that you can trigger in modules by restarting a region, set this to
    ;; true to make the entire instance exit instead of restarting the region.
    ;; This is meant to be used on systems where some external system like
    ;; Monit will restart any instance that exits, thereby making the shutdown
    ;; into a restart.
    ; InworldRestartShutsDown = false

    ;; Persistence of changed objects happens during regular sweeps. The
    ;; following control that behaviour to prevent frequently changing objects
    ;; from heavily loading the region data store.
    ;; If both of these values are set to zero then persistence of all changed
    ;; objects will happen on every sweep.

    ;# {MinimumTimeBeforePersistenceConsidered} {} {Time before un-changed object may be persisted} {} 60
    ;; Objects will be considered for persistance in the next sweep when they
    ;; have not changed for this number of seconds.
    ; MinimumTimeBeforePersistenceConsidered = 60

    ;# {MaximumTimeBeforePersistenceConsidered} {} {Time before changed objects may be persisted?} {} 600
    ;; Objects will always be considered for persistance in the next sweep
    ;; if the first change occurred this number of seconds ago.
    ; MaximumTimeBeforePersistenceConsidered = 600

    ;# {physical_prim} {} {Allow prims to be physical?} {true false} true
    ;; if you would like to allow prims to be physical and move by physics
    ;; with the physical checkbox in the client set this to true.
    ; physical_prim = true

    ;; Select a mesher here.
    ;;
    ;; Meshmerizer properly handles complex prims by using triangle meshes.
    ;; Note that only the ODE physics engine currently deals with meshed
    ;; prims in a satisfactory way.

    ;# {meshing} {} {Select mesher} {Meshmerizer ZeroMesher} Meshmerizer
    ;; ZeroMesher is faster but leaves the physics engine to model the mesh
    ;; using the basic shapes that it supports.
    ;; Usually this is only a box.
    ;; Default is Meshmerizer
    ; meshing = Meshmerizer
    ; meshing = ZeroMesher

    ;; Choose one of the physics engines below
    ;# {physics} {} {Select physics engine} {OpenDynamicsEngine BulletSim basicphysics POS} OpenDynamicsEngine
    ;; OpenDynamicsEngine is by some distance the most developed physics engine
    ;; BulletSim is experimental and in active development.
    ;; basicphysics effectively does not model physics at all, making all
    ;; objects phantom.  
    ;; Default is OpenDynamicsEngine
    ; physics = OpenDynamicsEngine
    ; physics = BulletSim
    ; physics = basicphysics
    ; physics = POS

    ;# {DefaultScriptEngine} {} {Default script engine} {XEngine} XEngine
    ;; Default script engine to use. Currently, we only have XEngine
    ; DefaultScriptEngine = "XEngine"

    ;# {HttpProxy} {} {Proxy URL for llHTTPRequest and dynamic texture loading} {} http://proxy.com:8080
    ;; Http proxy setting for llHTTPRequest and dynamic texture loading, if
    ;; required
    ; HttpProxy = "http://proxy.com:8080"

    ;# {HttpProxyExceptions} {HttpProxy} {Set of regular expressions defining URL that should not be proxied} {}
    ;; If you're using HttpProxy, then you can set HttpProxyExceptions to a
    ;; list of regular expressions for URLs that you don't want to go through
    ;; the proxy.
    ;; For example, servers inside your firewall.
    ;; Separate patterns with a ';'
    ; HttpProxyExceptions = ".mydomain.com;localhost"

    ;# {emailmodule} {} {Provide llEmail and llGetNextEmail functionality? (requires SMTP server)} {true false} false
    ;; The email module requires some configuration. It needs an SMTP
    ;; server to send mail through.
    ; emailmodule = DefaultEmailModule

    ;# {SpawnPointRouting} {} {Set routing method for Telehub Spawnpoints} {closest random sequence} closest
    ;; SpawnPointRouting adjusts the landing for incoming avatars.
    ;; "closest" will place the avatar at the SpawnPoint located in the closest
    ;; available spot to the destination (typically map click/landmark).
    ;; "random" will place the avatar on a randomly selected spawnpoint;
    ;; "sequence" will place the avatar on the next sequential SpawnPoint
    ; SpawnPointRouting = closest

    ;# {TelehubAllowLandmark} {} {Allow users with landmarks to override telehub routing} {true false} false
    ;; TelehubAllowLandmark allows users with landmarks to override telehub
    ;; routing and land at the landmark coordinates when set to true
    ;; default is false
    ; TelehubAllowLandmark = false


[AccessControl]
    ;# {AllowedClients} {} {Bar (|) separated list of allowed clients} {}
    ;; Bar (|) separated list of viewers which may gain access to the regions.
    ;; One can use a substring of the viewer name to enable only certain
    ;; versions
    ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
    ;; - "Imprudence" has access
    ;; - "Imprudence 1.3" has access
    ;; - "Imprudence 1.3.1" has no access
    ; AllowedClients =

    ;# {BannedClients} {} {Bar (|) separated list of banned clients} {}
    ;; Bar (|) separated list of viewers which may not gain access to the regions.
    ;; One can use a Substring of the viewer name to disable only certain
    ;; versions
    ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
    ;; - "Imprudence" has no access
    ;; - "Imprudence 1.3" has no access
    ;; - "Imprudence 1.3.1" has access
    ; BannedClients =


[Map]
    ;# {GenerateMaptiles} {} {Generate map tiles?} {true false} true
    ;; Map tile options.  
    ;; If true, then maptiles are generated using the MapImageModule below.
    ;; If false then the texture referenced by MaptileStaticUUID is used instead, which can also be overriden
    ;; in individual region config file(s).  If you do not want to upload map tiles at all, then you will need
    ;; both to set this to false and comment out the [Modules] MapImageServiceModule setting in config-include/
    ; GenerateMaptiles = true

    ;# {MapImageModule} {} {The map image module to use} {MapImageModule Warp3DImageModule} MapImageModule
    ;; The module to use in order to generate map images.
    ;; MapImageModule is the default.  Warp3DImageModule is an alternative experimental module that can
    ;; generate better images.
    ;MapImageModule = "MapImageModule"

    ;# {MaptileRefresh} {GenerateMaptiles} {Maptile refresh period?} {} 0
    ;; If desired, a running region can update the map tiles periodically
    ;; to reflect building activity. This names no sense of you don't have
    ;; prims on maptiles. Value is in seconds.
    ; MaptileRefresh = 0

    ;# {MaptileStaticUUID} {} {Asset ID for static map texture} {} 00000000-0000-0000-0000-000000000000
    ;; If not generating maptiles, use this static texture asset ID
    ; MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"

    ;# {TextureOnMapTile} {} {Use terrain textures for map tiles?} {true false} true
    ;; Use terrain texture for maptiles if true, use shaded green if false
    ; TextureOnMapTile = true

    ;# {DrawPrimOnMapTile} {} {Draw prim shapes on map tiles?} {true false} false
    ;; Draw objects on maptile.  This step might take a long time if you've
    ;; got a large number of objects, so you can turn it off here if you'd like.
    ; DrawPrimOnMapTile = true


[Permissions]
    ;# {permissionmodules} {} {Permission modules to use (may specify multiple modules, separated by comma} {} DefaultPermissionsModule
    ;; Permission modules to use, separated by comma.
    ;; Possible modules are DefaultPermissionsModule, PrimLimitsModule
    ; permissionmodules = DefaultPermissionsModule

    ;# {serverside_object_permissions} {permissionmodules:DefaultPermissionsModule} {Activate permission handling by the sim?} {true false} true
    ;; These are the parameters for the default permissions module
    ;;
    ;; If set to false, then, in theory, the server never carries out
    ;; permission checks (allowing anybody to copy
    ;; any item, etc.  This may not yet be implemented uniformally.
    ;; If set to true, then all permissions checks are carried out
    ; serverside_object_permissions = true

    ;# {allow_grid_gods} {} {Allow grid gods?} {true false} false
    ;; This allows users with a UserLevel of 200 or more to assume god
    ;; powers in the regions in this simulator.
    ; allow_grid_gods = false

    ;; This allows some control over permissions
    ;; please note that this still doesn't duplicate SL, and is not intended to
    ;# {region_owner_is_god} {} {Allow region owner gods} {true false} true
    ;; Allow region owners to assume god powers in their regions
    ; region_owner_is_god = true

    ;# {region_manager_is_god} {} {Allow region manager gods} {true false} false
    ;; Allow region managers to assume god powers in regions they manage
    ; region_manager_is_god = false

    ;# {parcel_owner_is_god} {} {Allow parcel owner gods} {true false} true
    ;; Allow parcel owners to assume god powers in their parcels
    ; parcel_owner_is_god = true

    ;# {simple_build_permissions} {} {Allow building in parcel by access list (no groups)} {true false} false
    ;; More control over permissions
    ;; This is definitely not SL!
    ;; Provides a simple control for land owners to give build rights to
    ;; specific avatars in publicly accessible parcels that disallow object
    ;; creation in general.
    ;; Owners specific avatars by adding them to the Access List of the parcel
    ;; without having to use the Groups feature
    ; simple_build_permissions = false


[Estates]
    ; If these values are commented out then the user will be asked for estate details when required (this is the normal case).
      ; If these values are uncommented then they will be used to create a default estate as necessary.
    ; New regions will be automatically assigned to that default estate.
    
    ;# {DefaultEstateName} {} {Default name for estate?} {} My Estate
    ;; Name for the default estate
    ; DefaultEstateName = My Estate

    ;# {DefaultEstateOwnerName} {} {Default estate owner name?} {} FirstName LastName
    ;; Name for default estate owner
    ; DefaultEstateOwnerName = FirstName LastName


    ; ** Standalone Estate Settings **    
    ; The following parameters will only be used on a standalone system to
    ; create an estate owner that does not already exist

    ;# {DefaultEstateOwnerUUID} {} {Default estate owner UUID?} {} 00000000-0000-0000-0000-000000000000
    ;; If DefaultEstateOwnerUUID is left at UUID.Zero (as below) then a random
    ;; UUID will be assigned. This is normally what you want
    ; DefaultEstateOwnerUUID = 00000000-0000-0000-0000-000000000000

    ;# {DefaultEstateOwnerEMail} {} {Default estate owner email?} {}
    ;; Email address for the default estate owner
    ; DefaultEstateOwnerEMail = owner@domain.com

    ;# {DefaultEstateOwnerPassword} {} {Default estate owner password} {}
    ;; Password for the default estate owner
    ; DefaultEstateOwnerPassword = password


[SMTP]
    ;; The SMTP server enabled the email module to send email to external
    ;; destinations.

    ;# {enabled} {[Startup]emailmodule:DefaultEmailModule} {Enable SMTP service?} {true false} false
    ;; Enable sending email via SMTP
    ; enabled = false

    ;# {internal_object_host} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Host name to treat as internal (object to object) email?} {} lsl.opensim.local
    ; internal_object_host = lsl.opensim.local

    ;# {host_domain_header_from} {[Startup]emailmodule:DefaultEmailModule enabled:true} {From address to use in the sent email header?} {} 127.0.0.1
    ; host_domain_header_from = "127.0.0.1"

    ;# {email_pause_time} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Period in seconds to delay after an email is sent.} {} 20
    ; email_pause_time = 20

    ;# {email_max_size} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Maximum total size of email in bytes.} {} 4096
    ; email_max_size = 4096

    ;# {SMTP_SERVER_HOSTNAME} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {} 127.0.0.1
    ; SMTP_SERVER_HOSTNAME = "127.0.0.1"

    ;# {SMTP_SERVER_PORT} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {SMTP server port?} {} 25
    ; SMTP_SERVER_PORT = 25

    ;# {SMTP_SERVER_LOGIN} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server user name?} {}
    ; SMTP_SERVER_LOGIN = ""

    ;# {SMTP_SERVER_PASSWORD} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server password} {}
    ; SMTP_SERVER_PASSWORD = ""


[Network]
    ;# {ConsoleUser} {} {User name for console account} {}
    ;; Configure the remote console user here. This will not actually be used
    ;; unless you use -console=rest at startup.
    ; ConsoleUser = "Test"
    ;# {ConsolePass} {} {Password for console account} {}
    ; ConsolePass = "secret"
    ;# {console_port} {} {Port for console connections} {} 0
    ; console_port = 0

    ;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000
    ;; Simulator HTTP port. This is not the region port, but the port the
    ;; entire simulator listens on. This port uses the TCP protocol, while
    ;; the region ports use UDP.
     http_listener_port = 9000

    ;# {ExternalHostNameForLSL} {} {Hostname to use for HTTP-IN URLs. This should be reachable from the internet.} {}
    ;; Hostname to use in llRequestURL/llRequestSecureURL
    ;; if not defined - default machine name is being used
    ;; (on Windows this mean NETBIOS name - useably only inside local network)
    ; ExternalHostNameForLSL = "127.0.0.1"

    ;# {shard} {} {Name to use for X-Secondlife-Shard header? (press enter if unsure)} {} OpenSim
    ;; What is reported as the "X-Secondlife-Shard"
    ;; Defaults to the user server url if not set
    ;; The old default is "OpenSim", set here for compatibility
    ;; The below is not commented for compatibility.
    shard = "OpenSim"

    ;# {user_agent} {} {User agent to report to web servers?} {} OpenSim LSL (Mozilla Compatible)
    ;; What is reported as the "User-Agent" when using llHTTPRequest
    ;; Defaults to not sent if not set here. See the notes section in the wiki
    ;; at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
    ;; " (Mozilla Compatible)" to the text where there are problems with a
    ;; web server
    ; user_agent = "OpenSim LSL (Mozilla Compatible)"


[XMLRPC]
    ;# {XmlRpcRouterModule} {} {Module used to route incoming llRemoteData calls} {XmlRpcRouterModule XmlRpcGridRouterModule} XmlRpcRouterModule
    ;; If enabled and set to XmlRpcRouterModule, this will post an event,
    ;; "xmlrpc_uri(string)" to the script concurrently with the first
    ;; remote_data event. This will contain the fully qualified URI an
    ;; external site needs to use to send XMLRPC requests to that script
    ;;
    ;; If enabled and set to XmlRpcGridRouterModule, newly created channels
    ;; will be registered with an external service via a configured uri
    ;XmlRpcRouterModule = "XmlRpcRouterModule"

    ;# {XmlRpcPort} {} {Port for incoming llRemoteData xmlrpc calls} {} 20800
    ;XmlRpcPort = 20800

    ;# {XmlRpcHubURI} {XmlRpcRouterModule} {URI for external service used to register xmlrpc channels created in the simulator. This depends on XmlRpcRouterModule being set to XmlRpcGridRouterModule} {} http://example.com
    ;; If XmlRpcRouterModule is set to XmlRpcGridRouterModule, the simulator
    ;; will use this address to register xmlrpc channels on the external
    ;; service
    ; XmlRpcHubURI = http://example.com


[ClientStack.LindenUDP]
    ;; See OpensSimDefaults.ini for the throttle options. You can copy the
    ;; relevant sections and override them here.
    ;; DO NOT MODIFY OpenSimDefaults.ini, as your changes would be lost
    ;; with the next update!

    ;# {DisableFacelights} {} {Stop facelights from working?} {true false} false
    ;; Quash and remove any light properties from attachments not on the
    ;; hands. This allows flashlights and lanterns to function, but kills
    ;; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps
    ;; will also be affected.
    ;; This is especially important in artistic builds that depend on lights
    ;; on the build for their appearance, since facelights will cause the
    ;; building's lights to possibly not be rendered.
    ; DisableFacelights = "false"


[ClientStack.LindenCaps]
    ;; For the long list of capabilities, see OpenSimDefaults.ini
    ;; Here are the few ones you may want to change. Possible values
    ;; are:
    ;;   "" -- empty, capability disabled
    ;;   "localhost" -- capability enabled and served by the simulator
    ;;   "<url>" -- capability enabled and served by some other server
    ;;
    ; These are enabled by default to localhost. Change if you see fit.
    Cap_GetTexture = "localhost"
    Cap_GetMesh = "localhost"
    Cap_AvatarPickerSearch = "localhost"

    ; This is disabled by default. Change if you see fit. Note that
    ; serving this cap from the simulators may lead to poor performace.
    Cap_WebFetchInventoryDescendents = ""


[SimulatorFeatures]
    ;# {MapImageServerURI} {} {URL for the map server} {}
    ; Experimental new information sent in SimulatorFeatures cap for Kokua
    ; viewers
    ; meant to override the MapImage and search server url given at login, and varying
    ; on a sim-basis.
    ; Viewers that don't understand it, will ignore it
    MapImageServerURI = "http://dorenas-testworld.no-ip.biz:9000/"
    ;# {SearchServerURI} {} {URL of the search server} {}
    SearchServerURI = "http://dorenas-testworld.no-ip.biz:9000/"


[Chat]
    ;# {whisper_distance} {} {Distance at which a whisper is heard, in meters?} {} 10
    ;; Distance in meters that whispers should travel.
    ; whisper_distance = 10

    ;# {say_distance} {} {Distance at which normal chat is heard, in meters?} {} 20
    ;; Distance in meters that ordinary chat should travel.
    ; say_distance = 20

    ;# {shout_distance} {} {Distance at which a shout is heard, in meters?} {} 100
    ;; Distance in meters that shouts should travel.
    ; shout_distance = 100


[EntityTransfer]
    ;# {DisableInterRegionTeleportCancellation} {} {Determine whether the cancel button is shown at all during teleports.} {false true} false
    ;; This option exists because cancelling at certain points can result in an unuseable session (frozen avatar, etc.)
    ;; Disabling cancellation can be okay in small closed grids where all teleports are highly likely to suceed.
    ;DisableInterRegionTeleportCancellation = false


[Messaging]
    ;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule "Offline Message Module V2" *}
    ;; Module to handle offline messaging. The core module requires an external
    ;; web service to do this. See OpenSim wiki.
    ; OfflineMessageModule = OfflineMessageModule
    ;; Or, alternatively, use this one, which works for both standalones and grids
    OfflineMessageModule = "Offline Message Module V2"

    ;# {OfflineMessageURL} {OfflineMessageModule:OfflineMessageModule Offline Message Module V2:Offline Message Module V2} {URL of offline messaging service} {}
    ;; URL of web service for offline message storage. Leave it commented if your service is local to the sim.
    ; OfflineMessageURL = http://yourserver/Offline.php or http://yourrobustserver:8003

    ;# {StorageProvider} {Offline Message Module V2:Offline Message Module V2} {DLL that provides the storage interface} {OpenSim.Data.MySQL.dll}
    ;; For standalones, this is the storage dll.
     StorageProvider = OpenSim.Data.MySQL.dll

    ;# {MuteListModule} {OfflineMessageModule:OfflineMessageModule} {} {} MuteListModule
    ;; Mute list handler (not yet implemented). MUST BE SET to allow offline
    ;; messages to work
     MuteListModule = MuteListModule

    ;# {MuteListURL} {OfflineMessageModule:OfflineMessageModule} {} {} http://yourserver/Mute.php
    ;; URL of the web service that serves mute lists. Not currently used, but
    ;; must be set to allow offline messaging to work.
    ; MuteListURL = http://yourserver/Mute.php

    ;; Control whether group invites and notices are stored for offline users.
    ;; Default is true.
    ;; This applies to both core groups module.
    ; ForwardOfflineGroupMessages = true


[ODEPhysicsSettings]
    ;# {mesh_sculpted_prim} {[Startup]physics:OpenDynamicsEngine} {Mesh sculpties so they collide as they look?} {true false} true
    ;; Do we want to mesh sculpted prim to collide like they look?
    ;; If you are seeing sculpt texture decode problems
    ;; (messages such as "Decoded image with unhandled number of components: 0 shortly followed by a physcs exception")
    ;; then you might want to try setting this to false.
    ; mesh_sculpted_prim = true

    ;# {use_NINJA_physics_joints} {[Startup]physics:OpenDynamicsEngine} {Use jointed (NINJA) physics?} {true false} false
    ;; If you would like physics joints to be enabled through a special naming
    ;; convention in the client, set this to true.
    ;; (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics)
    ; use_NINJA_physics_joints = false


[RemoteAdmin]
    ;; This is the remote admin module, which uses XMLRPC requests to
    ;; manage regions from a web interface.

    ;# {enabled} {} {Enable the remote admin interface?} {true false} false
    ; enabled = false

    ;# {port} {enabled:true} {Port to use for the remote admin interface? (0 = default)} {} 0
    ;; Set this to a nonzero value to have remote admin use a different port
    ; port = 0

    ;# {access_password} {enabled:true} {Password for the remote admin interface} {}
    ;; This password is required to make any XMLRPC call (should be set as
    ;; the "password" parameter)
    ; access_password = ""

    ;# {access_ip_addresses} {enabled:true} {List the IP addresses allowed to call RemoteAdmin?} {}
    ;; List the IP addresses allowed to call RemoteAdmin
    ;; If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.
    ;; access_ip_addresses = 0.0.0.0, 0.0.0.0 ...
    ; access_ip_addresses =

    ;# {create_region_enable_voice} {enabled:true} {Enable voice for newly created regions?} {true false} false
    ;; set this variable to true if you want the create_region XmlRpc
    ;; call to unconditionally enable voice on all parcels for a newly
    ;; created region
    ; create_region_enable_voice = false

    ;# {create_region_public} {enabled:true} {Make newly created regions public?} {true false} false
    ;; set this variable to false if you want the create_region XmlRpc
    ;; call to create all regions as private per default (can be
    ;; overridden in the XmlRpc call)
    ; create_region_public = false

    ;# {enabled_methods} {enabled:true} {List of methods to allow, separated by |} {} all
    ;; enable only those methods you deem to be appropriate using a | delimited
    ;; whitelist.
    ;; For example:
    ;; enabled_methods = admin_broadcast|admin_save_oar|admin_save_xml
    ;; if this parameter is not specified but enabled = true, all methods
    ;; will be available
    ; enabled_methods = all

    ;; specify the default appearance for an avatar created through the remote
    ;; admin interface
    ;; This will only take effect is the file specified by the
    ;; default_appearance setting below exists
    ; default_male = Default Male
    ; default_female = Default Female

    ;; Update appearance copies inventory items and wearables of default
    ;; avatars. if this value is false, just worn assets are copied to the
    ;; Clothes folder; if true, all Clothes and Bodyparts subfolders are copied.
    ;; The receiver will wear the same items the default avatar did wear.
    ; copy_folders = false

    ;; Path to default appearance XML file that specifies the look of the
    ;; default avatars
    ; default_appearance = default_appearance.xml


[Wind]
    ;# {enabled} {} {Enable wind module?} {true false} true
    ;; Enables the wind module.
    ; enabled = true

    ;# {wind_update_rate} {enabled:true} {Wind update rate in frames?} {} 150
    ;; How often should wind be updated, as a function of world frames.
    ;; Approximately 50 frames a second
    ; wind_update_rate = 150

    ;; The Default Wind Plugin to load
    ; wind_plugin = SimpleRandomWind

    ;; These settings are specific to the ConfigurableWind plugin
    ;; To use ConfigurableWind as the default, simply change wind_plugin
    ;; to ConfigurableWind and uncomment the following.
    ; avg_strength = 5.0
    ; avg_direction = 0.0
    ; var_strength = 5.0
    ; var_direction = 30.0
    ; rate_change = 1.0

    ;# {strength} {enabled:true wind_plugin:SimpleRandomWind} {Wind strength?} {} 1.0
    ;; This setting is specific to the SimpleRandomWind plugin
    ;; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind.
    ; strength = 1.0


[LightShare]
    ;# {enable_windlight} {} {Enable LightShare technology?} {true false} false
    ;; This enables the transmission of Windlight scenes to supporting clients,
    ;; such as the Meta7 viewer.
    ;; It has no ill effect on viewers which do not support server-side
    ;; windlight settings.
     enable_windlight = true


[DataSnapshot]
    ;# {index_sims} {} {Enable data snapshotting (search)?} {true false} false
    ;; The following set of configs pertains to search.
    ;; Set index_sims to true to enable search engines to index your
    ;; searchable data.
    ;; If false, no data will be exposed, DataSnapshot module will be off,
    ;; and you can ignore the rest of these search-related configs.
    ; index_sims = false

    ;# {data_exposure} {index_sims:true} {How much data should be exposed?} {minimum all} minimum
    ;; The variable data_exposure controls what the regions expose:
    ;;    minimum: exposes only things explicitly marked for search
    ;;    all: exposes everything
    ; data_exposure = minimum

    ;# {gridname} {index_sims:true} {Enter the name fo your grid} {} OSGrid
    ;; If search is on, change this to your grid name; will be ignored for
    ;; standalones
    ; gridname = "OSGrid"

    ;# {default_snapshot_period} {index_sims:true} {Period between data snapshots?} {} 1200
    ;; Period between data snapshots, in seconds. 20 minutes, for starters,
    ;; so that you see the initial changes fast.
    ;; Later, you may want to increase this to 3600 (1 hour) or more
    ; default_snapshot_period = 1200

    ;; This will be created in bin, if it doesn't exist already. It will hold
    ;; the data snapshots.
    ; snapshot_cache_directory = "DataSnapshot"

    ;# {data_services} {index_sims:true} {Data service URLs to register with?} {} http://metaverseink.com/cgi-bin/register.py
    ; This semicolon-separated string serves to notify specific data services
    ; about the existence of this sim. Uncomment if you want to index your
    ; data with this and/or other search providers.
    ; data_services="http://metaverseink.com/cgi-bin/register.py"


[Economy]
    ;# {SellEnabled} {} {Enable selling for 0?} {true false} true
    ; The default economy module only implements just enough to allow free actions (transfer of objects, etc).
    ; There is no intention to implement anything further in core OpenSimulator.
    ; This functionality has to be provided by third party modules.

    ;; Enables selling things for $0.  Default is true.
    ; SellEnabled = true

    ;# {PriceUpload} {} {Price for uploading?} {} 0
    ;; Money Unit fee to upload textures, animations etc.  Default is 0.
    ; PriceUpload = 0

    ;# {PriceGroupCreate} {} {Fee for group creation} {} 0
    ;; Money Unit fee to create groups.  Default is 0.
    ; PriceGroupCreate = 0


[XEngine]
    ;# {Enabled} {} {Enable the XEngine scripting engine?} {true false} true
    ;; Enable this engine in this OpenSim instance
    ; Enabled = true

    ;; How many threads to keep alive even if nothing is happening
    ; MinThreads = 2

    ;; How many threads to start at maximum load
    ; MaxThreads = 100

    ;; Time a thread must be idle (in seconds) before it dies
    ; IdleTimeout = 60

    ;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal
    ;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",
    ;; "Highest")
    ; Priority = "BelowNormal"

    ;; Maximum number of events to queue for a script (excluding timers)
    ; MaxScriptEventQueue = 300

    ;; Stack size per script engine thread in bytes.
    ;; If you are experiencing StackOverflowExceptions you may want to increase this (e.g. double it).
    ;; The trade-off may be increased memory usage by the script engine.
    ; ThreadStackSize = 262144

    ;; Set this to true (the default) to load each script into a separate
    ;; AppDomain.
    ;;
    ;; Setting this to false will load all script assemblies into the
    ;; current AppDomain, which will significantly improve script loading times.
    ;; It will also reduce initial per-script memory overhead.
    ;;
    ;; However, setting this to false will also prevent script DLLs from being unloaded from memory if the script is deleted.
    ;; This may cause an OutOfMemory problem over time when avatars with scripted attachments move in and out of the region.
    ;; Some Windows users have also reported script loading problems when AppDomainLoading = false
    ; AppDomainLoading = true

    ;; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
    ;; co-op will be more stable but this option is currently experimental.
    ;; If moving from co-op to abort, existing script DLLs will need to be recompiled.
    ;; This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run  
    ;; or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
    ;; One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
    ;; Current valid values are "abort" and "co-op"
    ; ScriptStopStrategy = abort
    

    ;# {DeleteScriptsOnStartup} {} {Delete previously compiled script DLLs on startup?} {true false} true
    ;; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false
    ;; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the
    ;; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used
    ;; by scripts have changed.
    DeleteScriptsOnStartup = false

    ;# {DefaultCompileLanguage} {Enabled:true} {Default script language?} {lsl vb cs} lsl
    ;; Default language for scripts
    ; DefaultCompileLanguage = "lsl"

    ;# {AllowedCompilers} {Enabled:true} {Languages to allow (comma separated)?} {} lsl
    ;; List of allowed languages (lsl,vb,cs)
    ;; AllowedCompilers=lsl,cs,js,vb.
    ;; *warning*, non lsl languages have access to static methods such as
    ;; System.IO.File.  Enable at your own risk.
    ; AllowedCompilers = "lsl"

    ;; Compile debug info (line numbers) into the script assemblies
    ; CompileWithDebugInformation = true

    ;; Allow the user of mod* functions.  This allows a script to pass messages
    ;; to a region module via the modSendCommand() function
    ;; Default is false
    ; AllowMODFunctions = false

    ;# {AllowOSFunctions} {Enabled:true} {Allow OSFunctions? (DANGEROUS!)} {true false} false
    ;; Allow the use of os* functions (some are dangerous)
    ; AllowOSFunctions = false

    ;# {AllowLightShareFunctions} {Enabled:false [LightShare]enable_windlight:true} {Allow LightShare functions?} {true false} false
    ; Allow the use of LightShare functions.
    ; The setting enable_windlight = true must also be enabled in the [LightShare] section.
    ; AllowLightShareFunctions = false

    ;# {OSFunctionThreatLevel} {Enabled:true AllowOSFunctions:true} {OSFunction threat level? (DANGEROUS!)} {None VeryLow Low Moderate High VeryHigh Severe} VeryLow
    ;; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
    ;; See http://opensimulator.org/wiki/Threat_level for more information on these levels.
    ;; We do not recommend that use set a general level above Low unless you have a high level of trust
    ;; in all the users that can run scripts in your simulator.  It is safer to explicitly
    ;; allow certain types of user to run higher threat level OSSL functions, as detailed later on.
    OSFunctionThreatLevel = Severe

    ; OS Functions enable/disable
    ; For each function, you can add one line, as shown
    ; The default for all functions allows them if below threat level

    ; true allows the use of the function unconditionally
    ; Allow_osSetRegionWaterHeight = true
    
    ; false disables the function completely
    ; Allow_osSetRegionWaterHeight = false
    
    ; Comma separated list of UUIDS allows the function for that list of UUIDS
    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
    
    ; Comma separated list of owner classes that allow the function for a particular class of owners. Choices are
    ; - PARCEL_GROUP_MEMBER:  allow if the object group is the same group as the parcel
    ; - PARCEL_OWNER:         allow if the object owner is the parcel owner
    ; - ESTATE_MANAGER:       allow if the object owner is an estate manager
    ; - ESTATE_OWNER:         allow if the object owner is the estate owner
    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb, PARCEL_OWNER, ESTATE_OWNER>, ...

    ; You can also use script creators as the uuid
    ; Creators_osSetRegionWaterHeight = <uuid>, ...

    ; If both Allow_ and Creators_ are given, effective permissions
    ; are the union of the two.

    ;# {EventLimit} {} {Amount of time a script can spend in an event handler} {} 30
    ;; Time a script can spend in an event handler before it is interrupted
    ; EventLimit = 30

    ;# {KillTimedOutScripts} {} {Kill script in case of event time overruns?} {true false} false
    ;; If a script overruns it's event limit, kill the script?
    ; KillTimedOutScripts = false

    ;# {ScriptDelayFactor} {} {Multiplier for scripting delays} {} 1.0
    ;; Sets the multiplier for the scripting delays
    ; ScriptDelayFactor = 1.0

    ;# {ScriptDistanceLimitFactor} {} {Multiplier for 10.0m distance limits?} {}
    ;; The factor the 10 m distances limits are multiplied by
    ; ScriptDistanceLimitFactor = 1.0

    ;# {NotecardLineReadCharsMax} {} {Maximum length of notecard line?} {} 255
    ;; Maximum length of notecard line read
    ;; Increasing this to large values potentially opens
    ;; up the system to malicious scripters
    ; NotecardLineReadCharsMax = 255

    ;# {SensorMaxRange} {} {Sensor range} {} 96.0
    ;; Sensor settings
    ; SensorMaxRange = 96.0
    ;# {SensorMaxResults} {} {Max sensor results returned?} {}
    ; SensorMaxResults = 16

    ;# {DisableUndergroundMovement} {} {Disable underground movement of prims} {true false} true
    ;; Disable underground movement of prims (default true); set to
    ;; false to allow script controlled underground positioning of
    ;; prims
    ; DisableUndergroundMovement = true

    ;# {ScriptEnginesPath} {} {Path to script assemblies} {} ScriptEngines
    ;; Path to script engine assemblies
    ;; Default is ./bin/ScriptEngines
    ; ScriptEnginesPath = "ScriptEngines"


[MRM]
    ;; Enables the Mini Region Modules Script Engine.
    ; Enabled = false

    ;; Runs MRM in a Security Sandbox
    ;; WARNING: DISABLING IS A SECURITY RISK.
    ; Sandboxed = true

    ;; The level sandbox to use, adjust at your OWN RISK.
    ;; Valid values are:
    ;; *  FullTrust
    ;; *  SkipVerification
    ;; *  Execution
    ;; *  Nothing
    ;; *  LocalIntranet
    ;; *  Internet
    ;; *  Everything
    ; SandboxLevel = "Internet"

    ;; Only allow Region Owners to run MRMs
    ;; May represent a security risk if you disable this.
    ; OwnerOnly = true


[FreeSwitchVoice]
    ;; In order for this to work you need a functioning FreeSWITCH PBX set up.
    ;; Configuration details at http://opensimulator.org/wiki/Freeswitch_Module
    ; Enabled = false

    ;; You need to load a local service for a standalone, and a remote service
    ;; for a grid region. Use one of the lines below, as appropriate
    ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini
    ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
    ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector

    ;; If using a remote connector, specify the server URL
    ; FreeswitchServiceURL = http://my.grid.server:8004/fsapi


[Groups]
    ;# {Enabled} {} {Enable groups?} {true false} false
    ;; Enables the groups module
     Enabled = true

    ;# {LevelGroupCreate} {Enabled:true} {User level for creating groups} {} 0
    ;; Minimum user level required to create groups
    ; LevelGroupCreate = 0

    ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default
    ;; The default module can use a PHP XmlRpc server from the Flotsam project at
    ;; http://code.google.com/p/flotsam/
    ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
    ; Module = Default
    ;; or... use Groups Module V2, which works for standalones and robust grids
    Module = "Groups Module V2"

    ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll}
    StorageProvider = OpenSim.Data.MySQL.dll

    ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector
    ;; Service connectors to the Groups Service as used in the GroupsModule.  Select one as follows:
    ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector
    ;; -- for Simian Groups use SimianGroupsServicesConnector
    ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"
    ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"
    ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"
    ;; Note that the quotes "" around the words are important!
    ServicesConnectorModule = Groups Local Service Connector

    ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local
    ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote
     LocalService = local

    ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}
    ;; URI for the groups services of this grid
    ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
    ;; or http://mygridserver.com:82/Grid/ for SimianGrid
    ;; or http:://mygridserver.com:8003 for robust, V2
    ;; Leave it commented for standalones, V2
    ; GroupsServerURI = ""

    ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {}
    ;; Used for V2 in HG only. For example
    ;; http://mygridserver.com:9000 or http://mygridserver.com:8002
    ;; If you have this set under [Startup], no need to set it here, leave it commented
    ; HomeURI = ""

    ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true
    ; MessagingEnabled = true

    ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule
    ; MessagingModule = GroupsMessagingModule
    ;; or use V2 for Groups V2
     MessagingModule = "Groups Messaging Module V2"

    ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true
    ;; Enable Group Notices
     NoticesEnabled = true

    ;# {MessageOnlineUsersOnly} {Module:GroupsModule Module} {Message online users only?} {true false} false
    ; Experimental option to only message online users rather than all users
    ; Should make large groups with few online members messaging faster, as the expense of more calls to presence service
    ; Applies Flotsam Group only. V2 has this always on, no other option
     MessageOnlineUsersOnly = true

    ;; This makes the Groups modules very chatty on the console.
    ; DebugEnabled = false

    ;; XmlRpc Security settings.  These must match those set on your backend
    ;; groups service if the service is using these keys
    ; XmlRpcServiceReadKey    = 1234
    ; XmlRpcServiceWriteKey   = 1234


[InterestManagement]
     ;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness Time Distance SimpleAngularDistance FrontBack} BestAvatarResponsiveness
     ;; This section controls how state updates are prioritized for each client
     ;; Valid values are BestAvatarResponsiveness, Time, Distance,
     ;; SimpleAngularDistance, FrontBack
     ; UpdatePrioritizationScheme = BestAvatarResponsiveness


[MediaOnAPrim]
    ;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true
    ;; Enable media on a prim facilities
     Enabled = true;


[NPC]
    ;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false
     Enabled = true


[Terrain]
    ;# {InitialTerrain} {} {Initial terrain type} {pinhead-island flat} pinhead-island
    ; InitialTerrain = "pinhead-island"


[UserProfiles]
  ;# {ProfileURL} {} {Set url to UserProfilesService} {}
  ;; Set the value of the url to your UserProfilesService
  ;; If un-set / "" the module is disabled
  ProfileServiceURL = http://dorenas-testworld.no-ip.biz:9000


[Architecture]
    ;# {Include-Architecture} {} {Choose one of the following architectures} {config-include/Standalone.ini config-include/StandaloneHypergrid.ini config-include/Grid.ini config-include/GridHypergrid.ini config-include/SimianGrid.ini config-include/HyperSimianGrid.ini} config-include/Standalone.ini
    ;; Uncomment one of the following includes as required.  For instance, to create a standalone OpenSim,
    ;; uncomment Include-Architecture = "config-include/Standalone.ini"
    ;;
    ;; Then you will need to copy and edit the corresponding *Common.example file in config-include/
    ;; that the referenced .ini file goes on to include.
    ;;
    ;; For instance, if you chose "config-include/Standalone.ini" then you will need to copy
    ;; "config-include/StandaloneCommon.ini.example" to "config-include/StandaloneCommon.ini" before
    ;; editing it to set the database and backend services that OpenSim will use.
    ;;
    ; Include-Architecture = "config-include/Standalone.ini"
    ;Include-Architecture = "config-include/StandaloneHypergrid.ini"
    ; Include-Architecture = "config-include/Grid.ini"
     Include-Architecture = "config-include/GridHypergrid.ini"
    ; Include-Architecture = "config-include/SimianGrid.ini"
    ; Include-Architecture = "config-include/HyperSimianGrid.ini"
Zitieren


Möglicherweise verwandte Themen...
Thema Verfasser Antworten Ansichten Letzter Beitrag
  Profile Modul -> update ab r/17802 nötig MichelleArgus 0 1.318 14.01.2012, 18:09
Letzter Beitrag: MichelleArgus
  Profile-Problem Dorena Verne 10 5.642 09.05.2011, 13:52
Letzter Beitrag: Dorena Verne

Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste