Aufsetzen des PHPGridServers

Code:
;; This is the main configuration file for OpenSimulator.

;; If it's named OpenSim.ini then it will be loaded by OpenSimulator.

;; If it's named OpenSim.ini.example then you will need to copy it to 

;; OpenSim.ini first (if that file does not already exist)

;;

;; If you are copying, then once you have copied OpenSim.ini.example to 

;; OpenSim.ini you will need to pick an architecture in the [Architecture] 

;; section at the end of this file.

;;

;; The settings in this file are in the form "<key> = <value>".  For example, 

;; save_crashes = false in the [Startup] section below.

;;

;; All settings are initially commented out and the default value used, as 

;; found in OpenSimDefaults.ini.  To change a setting, first uncomment it by 

;; deleting the initial semicolon (;) and then change the value.  This will

;; override the value in OpenSimDefaults.ini

;; 

;; If you want to find out what configuration OpenSimulator has finished with

;; once all the configuration files are loaded then type "config show" on the

;; region console command line.

;;

;; 

;; NOTES FOR DEVELOPERS REGARDING THE FORMAT OF THIS FILE

;;

;; All leading white space is ignored, but preserved.

;;

;; Double semicolons denote a text comment

;;

;; ;# denotes a configuration directive description

;;    formatted as:

;;    {option} {depends on} {question to ask} {choices} default value

;;    Any text comments following the declaration, up to the next blank line.

;;    will be copied to the generated file (NOTE: generation is not yet

;;    implemented)

;;

;;    A * in the choices list will allow an empty entry.

;;    An empty question will set the default if the dependencies are

;;    satisfied.

;;

;; ;  denotes a commented out option.

;;    Any options added to OpenSim.ini.example should be initially commented 

;;    out.





[Startup]

    ;# {ConsolePrompt} {} {ConsolePrompt} {} "Region (\R) "

    ;; Console prompt

    ;; Certain special characters can be used to customize the prompt

    ;; Currently, these are

    ;; \R - substitute region name

    ;; \\ - substitute \

    ; ConsolePrompt = "Region (\R) "



    ;# {save_crashes} {} {Save crashes to disk?} {true false} false

    ;; Set this to true if you want to log crashes to disk

    ;; this can be useful when submitting bug reports.

    ;; However, this will only log crashes within OpenSimulator that cause the

    ;; entire program to exit

    ;; It will not log crashes caused by virtual machine failures, which

    ;; includes mono and ODE failures.

    ;; You will need to capture these native stack traces by recording the

    ;; session log itself.

    ; save_crashes = false



    ;# {crash_dir} {save_crashes:true} {Directory to save crashes to?} {} crashes

    ;; Directory to save crashes to if above is enabled

    ;; (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)

    ; crash_dir = "crashes"



    ;# {PIDFile} {} {Path to PID file?} {}

    ;; Place to create a PID file

    ; PIDFile = "/tmp/OpenSim.exe.pid"



    ;# {region_info_source} {} {Where to load region from?} {filesystem web} filesystem

    ;; Determine where OpenSimulator looks for the files which tell it

    ;; which regions to server

    ;; Default is "filesystem"

    ; region_info_source = "filesystem"

    ; region_info_source = "web"

    

    ;# {regionload_regionsdir} {region_info_source} {Location of file?} {} Regions

    ;; Determines where the region XML files are stored if you are loading

    ;; these from the filesystem.

    ;; Defaults to bin/Regions in your OpenSimulator installation directory

    ; regionload_regionsdir="C:\somewhere\xmlfiles\"



    ;# {regionload_webserver_url} {region_info_source} {URL to load region from?} {}

    ;; Determines the page from which regions xml is retrieved if you are

    ;; loading these from the web.

    ;; The XML here has the same format as it does on the filesystem

    ;; (including the <Root> tag), except that everything is also enclosed

    ;; in a <Regions> tag.

    ; regionload_webserver_url = "http://example.com/regions.xml";



    ;# {allow_regionless} {} {Allow simulator to start up with no regions configured.} {true false} false

    ;; Allow the simulator to start up if there are no region configuration available

    ;; from the selected region_info_source.

    ; allow_regionless = false



    ;# {MaxPrimUndos} {} {Maximum number of undos avialable for position, rotation and scale changes of each prim} {} 20

    ;; Increasing the number of undos available number will increase memory usage.

    MaxPrimUndos = 20



    ;# {NonPhysicalPrimMin} {} {Minimum size of nonphysical prims?} {} 0.001

    ;; Minimum size for non-physical prims.  Affects resizing of existing 

    ;; prims.  This can be overriden in the region config file (as 

    ;; NonPhysicalPrimMin!).

    ; NonPhysicalPrimMin = 0.001



    ;# {NonPhysicalPrimMax} {} {Maximum size of nonphysical prims?} {} 256

    ;; Maximum size for non-physical prims.  Affects resizing of existing

    ;; prims. This can be overriden in the region config file (as 

    ;; NonPhysicalPrimMax!).

    ; NonPhysicalPrimMax = 256



    ;# {PhysicalPrimMin} {} {Minimum size of physical prims?} {} 10

    ;; Maximum size where a prim can be physical.  Affects resizing of

    ;; existing prims.  This can be overriden in the region config file.

    ; PhysicalPrimMin = 0.01



    ;# {PhysicalPrimMax} {} {Maximum size of physical prims?} {} 10

    ;; Maximum size where a prim can be physical.  Affects resizing of

    ;; existing prims.  This can be overriden in the region config file.

    ; PhysicalPrimMax = 10



    ;# {ClampPrimSize} {} {Clamp viewer rezzed prims to max sizes?} {true false} false

    ;; If a viewer attempts to rez a prim larger than the non-physical or

    ;; physical prim max, clamp the dimensions to the appropriate maximum

    ;; This can be overriden in the region config file.

    ; ClampPrimSize = false

    

    ;# {LinksetPrims} {} {Max prims an object will hold?} {} 0

    ;; Maximum number of prims allowable in a linkset. Affects creating new

    ;; linksets. Ignored if less than or equal to zero.

    ;; This can be overriden in the region config file.

    ; LinksetPrims = 0



    ;# {AllowScriptCrossing} {} {Allow scripts to cross into this region} {true false} true

    ;; Allow scripts to keep running when they cross region boundaries, rather

    ;; than being restarted.  State is reloaded on the destination region.

    ;; This only applies when crossing to a region running in a different

    ;; simulator.  

    ;; For crossings where the regions are on the same simulator the script is

    ;; always kept running.

    ; AllowScriptCrossing = true



    ;# {TrustBinaries} {AllowScriptCrossing:true} {Accept compiled binary script code? (DANGEROUS!)} {true false} false

    ;; Allow compiled script binary code to cross region boundaries.

    ;; If you set this to "true", any region that can teleport to you can

    ;; inject ARBITRARY BINARY CODE into your system. Use at your own risk.

    ;; YOU HAVE BEEN WARNED!!!

    ; TrustBinaries = false



    ;# {CombineContiguousRegions} {} {Create megaregions where possible? (Do not use with existing content!)} {true false} false

    ;; Combine all contiguous regions into one large megaregion

    ;; Order your regions from South to North, West to East in your regions.ini

    ;; and then set this to true

    ;; Warning!  Don't use this with regions that have existing content!,

    ;; This will likely break them

    ; CombineContiguousRegions = false



    ;# {InworldRestartShutsDown} {} {Shutdown instance on region restart?} {true false} false

    ;; If you have only one region in an instance, or to avoid the many bugs

    ;; that you can trigger in modules by restarting a region, set this to

    ;; true to make the entire instance exit instead of restarting the region.

    ;; This is meant to be used on systems where some external system like

    ;; Monit will restart any instance that exits, thereby making the shutdown

    ;; into a restart.

    ; InworldRestartShutsDown = false



    ;; Persistence of changed objects happens during regular sweeps. The

    ;; following control that behaviour to prevent frequently changing objects

    ;; from heavily loading the region data store.

    ;; If both of these values are set to zero then persistence of all changed

    ;; objects will happen on every sweep.



    ;# {MinimumTimeBeforePersistenceConsidered} {} {Time before un-changed object may be persisted} {} 60

    ;; Objects will be considered for persistance in the next sweep when they

    ;; have not changed for this number of seconds.

    ; MinimumTimeBeforePersistenceConsidered = 60



    ;# {MaximumTimeBeforePersistenceConsidered} {} {Time before changed objects may be persisted?} {} 600

    ;; Objects will always be considered for persistance in the next sweep

    ;; if the first change occurred this number of seconds ago.

    ; MaximumTimeBeforePersistenceConsidered = 600



    ;# {physical_prim} {} {Allow prims to be physical?} {true false} true

    ;; if you would like to allow prims to be physical and move by physics

    ;; with the physical checkbox in the client set this to true.

    ; physical_prim = true



    ;; Select a mesher here.

    ;;

    ;; Meshmerizer properly handles complex prims by using triangle meshes.

    ;; Note that only the ODE physics engine currently deals with meshed

    ;; prims in a satisfactory way.



    ;# {meshing} {} {Select mesher} {Meshmerizer ZeroMesher} Meshmerizer

    ;; ZeroMesher is faster but leaves the physics engine to model the mesh

    ;; using the basic shapes that it supports.

    ;; Usually this is only a box.

    ;; Default is Meshmerizer

    ; meshing = Meshmerizer

    ; meshing = ZeroMesher



    ;; Choose one of the physics engines below

    ;# {physics} {} {Select physics engine} {OpenDynamicsEngine BulletSim basicphysics POS} OpenDynamicsEngine

    ;; OpenDynamicsEngine is by some distance the most developed physics engine

    ;; BulletSim is experimental and in active development.

    ;; basicphysics effectively does not model physics at all, making all

    ;; objects phantom.   

    ;; Default is OpenDynamicsEngine

    ; physics = OpenDynamicsEngine

    ; physics = BulletSim

    ; physics = basicphysics

    ; physics = POS



    ;# {DefaultScriptEngine} {} {Default script engine} {XEngine} XEngine

    ;; Default script engine to use. Currently, we only have XEngine

    ; DefaultScriptEngine = "XEngine"



    ;# {HttpProxy} {} {Proxy URL for llHTTPRequest and dynamic texture loading} {} http://proxy.com:8080

    ;; Http proxy setting for llHTTPRequest and dynamic texture loading, if

    ;; required

    ; HttpProxy = "http://proxy.com:8080"



    ;# {HttpProxyExceptions} {HttpProxy} {Set of regular expressions defining URL that should not be proxied} {}

    ;; If you're using HttpProxy, then you can set HttpProxyExceptions to a

    ;; list of regular expressions for URLs that you don't want to go through

    ;; the proxy.

    ;; For example, servers inside your firewall.

    ;; Separate patterns with a ';'

    ; HttpProxyExceptions = ".mydomain.com;localhost"



    ;# {emailmodule} {} {Provide llEmail and llGetNextEmail functionality? (requires SMTP server)} {true false} false

    ;; The email module requires some configuration. It needs an SMTP

    ;; server to send mail through.

    ; emailmodule = DefaultEmailModule



    ;# {SpawnPointRouting} {} {Set routing method for Telehub Spawnpoints} {closest random sequence} closest

    ;; SpawnPointRouting adjusts the landing for incoming avatars.

    ;; "closest" will place the avatar at the SpawnPoint located in the closest

    ;; available spot to the destination (typically map click/landmark).

    ;; "random" will place the avatar on a randomly selected spawnpoint;

    ;; "sequence" will place the avatar on the next sequential SpawnPoint

    ; SpawnPointRouting = closest



    ;# {TelehubAllowLandmark} {} {Allow users with landmarks to override telehub routing} {true false} false

    ;; TelehubAllowLandmark allows users with landmarks to override telehub

    ;; routing and land at the landmark coordinates when set to true

    ;; default is false

    ; TelehubAllowLandmark = false





[AccessControl]

    ;# {AllowedClients} {} {Bar (|) separated list of allowed clients} {}

    ;; Bar (|) separated list of viewers which may gain access to the regions.

    ;; One can use a substring of the viewer name to enable only certain

    ;; versions

    ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"

    ;; - "Imprudence" has access

    ;; - "Imprudence 1.3" has access

    ;; - "Imprudence 1.3.1" has no access

    ; AllowedClients =



    ;# {BannedClients} {} {Bar (|) separated list of banned clients} {}

    ;; Bar (|) separated list of viewers which may not gain access to the regions.

    ;; One can use a Substring of the viewer name to disable only certain

    ;; versions

    ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"

    ;; - "Imprudence" has no access

    ;; - "Imprudence 1.3" has no access

    ;; - "Imprudence 1.3.1" has access

    ; BannedClients = 





[Map]

    ;# {GenerateMaptiles} {} {Generate map tiles?} {true false} true

    ;; Map tile options.  

    ;; If true, then maptiles are generated using the MapImageModule below.

    ;; If false then the texture referenced by MaptileStaticUUID is used instead, which can also be overriden

    ;; in individual region config file(s).  If you do not want to upload map tiles at all, then you will need 

    ;; both to set this to false and comment out the [Modules] MapImageServiceModule setting in config-include/

    ; GenerateMaptiles = true



    ;# {MapImageModule} {} {The map image module to use} {MapImageModule Warp3DImageModule} MapImageModule

    ;; The module to use in order to generate map images.

    ;; MapImageModule is the default.  Warp3DImageModule is an alternative experimental module that can 

    ;; generate better images.

    ;MapImageModule = "MapImageModule"



    ;# {MaptileRefresh} {GenerateMaptiles} {Maptile refresh period?} {} 0

    ;; If desired, a running region can update the map tiles periodically

    ;; to reflect building activity. This names no sense of you don't have

    ;; prims on maptiles. Value is in seconds.

    ; MaptileRefresh = 0



    ;# {MaptileStaticUUID} {} {Asset ID for static map texture} {} 00000000-0000-0000-0000-000000000000

    ;; If not generating maptiles, use this static texture asset ID

    ; MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"



    ;# {TextureOnMapTile} {} {Use terrain textures for map tiles?} {true false} true

    ;; Use terrain texture for maptiles if true, use shaded green if false

    ; TextureOnMapTile = true



    ;# {DrawPrimOnMapTile} {} {Draw prim shapes on map tiles?} {true false} false

    ;; Draw objects on maptile.  This step might take a long time if you've

    ;; got a large number of objects, so you can turn it off here if you'd like.

    ; DrawPrimOnMapTile = true





[Permissions]

    ;# {permissionmodules} {} {Permission modules to use (may specify multiple modules, separated by comma} {} DefaultPermissionsModule

    ;; Permission modules to use, separated by comma.

    ;; Possible modules are DefaultPermissionsModule, PrimLimitsModule

    ; permissionmodules = DefaultPermissionsModule



    ;# {serverside_object_permissions} {permissionmodules:DefaultPermissionsModule} {Activate permission handling by the sim?} {true false} true

    ;; These are the parameters for the default permissions module

    ;;

    ;; If set to false, then, in theory, the server never carries out

    ;; permission checks (allowing anybody to copy

    ;; any item, etc.  This may not yet be implemented uniformally.

    ;; If set to true, then all permissions checks are carried out

    ; serverside_object_permissions = true



    ;# {allow_grid_gods} {} {Allow grid gods?} {true false} false

    ;; This allows users with a UserLevel of 200 or more to assume god

    ;; powers in the regions in this simulator.

    ; allow_grid_gods = false



    ;; This allows some control over permissions

    ;; please note that this still doesn't duplicate SL, and is not intended to

    ;# {region_owner_is_god} {} {Allow region owner gods} {true false} true

    ;; Allow region owners to assume god powers in their regions

    ; region_owner_is_god = true



    ;# {region_manager_is_god} {} {Allow region manager gods} {true false} false

    ;; Allow region managers to assume god powers in regions they manage

    ; region_manager_is_god = false



    ;# {parcel_owner_is_god} {} {Allow parcel owner gods} {true false} true

    ;; Allow parcel owners to assume god powers in their parcels

    ; parcel_owner_is_god = true



    ;# {simple_build_permissions} {} {Allow building in parcel by access list (no groups)} {true false} false

    ;; More control over permissions

    ;; This is definitely not SL!

    ;; Provides a simple control for land owners to give build rights to

    ;; specific avatars in publicly accessible parcels that disallow object

    ;; creation in general. 

    ;; Owners specific avatars by adding them to the Access List of the parcel

    ;; without having to use the Groups feature

    ; simple_build_permissions = false





[Estates]

    ; If these values are commented out then the user will be asked for estate details when required (this is the normal case).

      ; If these values are uncommented then they will be used to create a default estate as necessary.

    ; New regions will be automatically assigned to that default estate.

    

    ;# {DefaultEstateName} {} {Default name for estate?} {} My Estate

    ;; Name for the default estate

    ; DefaultEstateName = My Estate



    ;# {DefaultEstateOwnerName} {} {Default estate owner name?} {} FirstName LastName

    ;; Name for default estate owner

    ; DefaultEstateOwnerName = FirstName LastName





    ; ** Standalone Estate Settings **    

    ; The following parameters will only be used on a standalone system to 

    ; create an estate owner that does not already exist



    ;# {DefaultEstateOwnerUUID} {} {Default estate owner UUID?} {} 00000000-0000-0000-0000-000000000000

    ;; If DefaultEstateOwnerUUID is left at UUID.Zero (as below) then a random 

    ;; UUID will be assigned. This is normally what you want 

    ; DefaultEstateOwnerUUID = 00000000-0000-0000-0000-000000000000



    ;# {DefaultEstateOwnerEMail} {} {Default estate owner email?} {}

    ;; Email address for the default estate owner

    ; DefaultEstateOwnerEMail = owner@domain.com



    ;# {DefaultEstateOwnerPassword} {} {Default estate owner password} {}

    ;; Password for the default estate owner

    ; DefaultEstateOwnerPassword = password





[SMTP]

    ;; The SMTP server enabled the email module to send email to external

    ;; destinations.



    ;# {enabled} {[Startup]emailmodule:DefaultEmailModule} {Enable SMTP service?} {true false} false

    ;; Enable sending email via SMTP

    ; enabled = false



    ;# {internal_object_host} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Host name to treat as internal (object to object) email?} {} lsl.opensim.local

    ; internal_object_host = lsl.opensim.local



    ;# {host_domain_header_from} {[Startup]emailmodule:DefaultEmailModule enabled:true} {From address to use in the sent email header?} {} 127.0.0.1

    ; host_domain_header_from = "127.0.0.1"



    ;# {email_pause_time} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Period in seconds to delay after an email is sent.} {} 20

    ; email_pause_time = 20



    ;# {email_max_size} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Maximum total size of email in bytes.} {} 4096

    ; email_max_size = 4096



    ;# {SMTP_SERVER_HOSTNAME} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {} 127.0.0.1

    ; SMTP_SERVER_HOSTNAME = "127.0.0.1"



    ;# {SMTP_SERVER_PORT} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {SMTP server port?} {} 25

    ; SMTP_SERVER_PORT = 25



    ;# {SMTP_SERVER_LOGIN} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server user name?} {}

    ; SMTP_SERVER_LOGIN = ""



    ;# {SMTP_SERVER_PASSWORD} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server password} {}

    ; SMTP_SERVER_PASSWORD = ""





[Network]

    ;# {ConsoleUser} {} {User name for console account} {}

    ;; Configure the remote console user here. This will not actually be used

    ;; unless you use -console=rest at startup.

    ; ConsoleUser = "Test"

    ;# {ConsolePass} {} {Password for console account} {}

    ; ConsolePass = "secret"

    ;# {console_port} {} {Port for console connections} {} 0

    ; console_port = 0



    ;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000

    ;; Simulator HTTP port. This is not the region port, but the port the

    ;; entire simulator listens on. This port uses the TCP protocol, while

    ;; the region ports use UDP.

    ; http_listener_port = 9000



    ;# {ExternalHostNameForLSL} {} {Hostname to use for HTTP-IN URLs. This should be reachable from the internet.} {}

    ;; Hostname to use in llRequestURL/llRequestSecureURL

    ;; if not defined - default machine name is being used

    ;; (on Windows this mean NETBIOS name - useably only inside local network)

    ; ExternalHostNameForLSL = ""



    ;# {shard} {} {Name to use for X-Secondlife-Shard header? (press enter if unsure)} {} OpenSim

    ;; What is reported as the "X-Secondlife-Shard"

    ;; Defaults to the user server url if not set

    ;; The old default is "OpenSim", set here for compatibility

    ;; The below is not commented for compatibility.

    shard = "OpenSim"



    ;# {user_agent} {} {User agent to report to web servers?} {} OpenSim LSL (Mozilla Compatible)

    ;; What is reported as the "User-Agent" when using llHTTPRequest

    ;; Defaults to not sent if not set here. See the notes section in the wiki

    ;; at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding

    ;; " (Mozilla Compatible)" to the text where there are problems with a 

    ;; web server

    ; user_agent = "OpenSim LSL (Mozilla Compatible)"





[XMLRPC]

    ;# {XmlRpcRouterModule} {} {Module used to route incoming llRemoteData calls} {XmlRpcRouterModule XmlRpcGridRouterModule} XmlRpcRouterModule

    ;; If enabled and set to XmlRpcRouterModule, this will post an event, 

    ;; "xmlrpc_uri(string)" to the script concurrently with the first 

    ;; remote_data event. This will contain the fully qualified URI an 

    ;; external site needs to use to send XMLRPC requests to that script

    ;;

    ;; If enabled and set to XmlRpcGridRouterModule, newly created channels

    ;; will be registered with an external service via a configured uri

    ;XmlRpcRouterModule = "XmlRpcRouterModule"



    ;# {XmlRpcPort} {} {Port for incoming llRemoteData xmlrpc calls} {} 20800

    ;XmlRpcPort = 20800



    ;# {XmlRpcHubURI} {XmlRpcRouterModule} {URI for external service used to register xmlrpc channels created in the simulator. This depends on XmlRpcRouterModule being set to XmlRpcGridRouterModule} {} http://example.com

    ;; If XmlRpcRouterModule is set to XmlRpcGridRouterModule, the simulator

    ;; will use this address to register xmlrpc channels on the external

    ;; service 

    ; XmlRpcHubURI = http://example.com





[ClientStack.LindenUDP]

    ;; See OpensSimDefaults.ini for the throttle options. You can copy the

    ;; relevant sections and override them here.

    ;; DO NOT MODIFY OpenSimDefaults.ini, as your changes would be lost

    ;; with the next update!



    ;# {DisableFacelights} {} {Stop facelights from working?} {true false} false

    ;; Quash and remove any light properties from attachments not on the

    ;; hands. This allows flashlights and lanterns to function, but kills

    ;; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps

    ;; will also be affected.

    ;; This is especially important in artistic builds that depend on lights

    ;; on the build for their appearance, since facelights will cause the

    ;; building's lights to possibly not be rendered.

    ; DisableFacelights = "false"





[ClientStack.LindenCaps]

    ;; For the long list of capabilities, see OpenSimDefaults.ini

    ;; Here are the few ones you may want to change. Possible values

    ;; are:

    ;;   "" -- empty, capability disabled

    ;;   "localhost" -- capability enabled and served by the simulator

    ;;   "<url>" -- capability enabled and served by some other server

    ;;

    ; These are enabled by default to localhost. Change if you see fit.

    Cap_GetTexture = "localhost"

    Cap_GetMesh = "localhost"

    Cap_AvatarPickerSearch = "localhost"



    ; This is disabled by default. Change if you see fit. Note that

    ; serving this cap from the simulators may lead to poor performace.

    Cap_WebFetchInventoryDescendents = ""





[SimulatorFeatures]

    ;# {MapImageServerURI} {} {URL for the map server} {}

    ; Experimental new information sent in SimulatorFeatures cap for Kokua

    ; viewers 

    ; meant to override the MapImage and search server url given at login, and varying 

    ; on a sim-basis.

    ; Viewers that don't understand it, will ignore it

    ;MapImageServerURI = "http://127.0.0.1:9000/"

    ;# {SearchServerURI} {} {URL of the search server} {}

    ;SearchServerURI = "http://127.0.0.1:9000/"





[Chat]

    ;# {whisper_distance} {} {Distance at which a whisper is heard, in meters?} {} 10

    ;; Distance in meters that whispers should travel.

    ; whisper_distance = 10



    ;# {say_distance} {} {Distance at which normal chat is heard, in meters?} {} 20

    ;; Distance in meters that ordinary chat should travel.

    ; say_distance = 20



    ;# {shout_distance} {} {Distance at which a shout is heard, in meters?} {} 100

    ;; Distance in meters that shouts should travel.

    ; shout_distance = 100





[EntityTransfer]

    ;# {DisableInterRegionTeleportCancellation} {} {Determine whether the cancel button is shown at all during teleports.} {false true} false

    ;; This option exists because cancelling at certain points can result in an unuseable session (frozen avatar, etc.)

    ;; Disabling cancellation can be okay in small closed grids where all teleports are highly likely to suceed.

    ;DisableInterRegionTeleportCancellation = false





[Messaging]

    ;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule "Offline Message Module V2" *}

    ;; Module to handle offline messaging. The core module requires an external

    ;; web service to do this. See OpenSim wiki.

    ; OfflineMessageModule = OfflineMessageModule

    ;; Or, alternatively, use this one, which works for both standalones and grids

    ; OfflineMessageModule = "Offline Message Module V2"



    ;# {OfflineMessageURL} {OfflineMessageModule:OfflineMessageModule Offline Message Module V2:Offline Message Module V2} {URL of offline messaging service} {}

    ;; URL of web service for offline message storage. Leave it commented if your service is local to the sim.

    ; OfflineMessageURL = http://yourserver/Offline.php or http://yourrobustserver:8003



    ;# {StorageProvider} {Offline Message Module V2:Offline Message Module V2} {DLL that provides the storage interface} {OpenSim.Data.MySQL.dll}

    ;; For standalones, this is the storage dll.

    ; StorageProvider = OpenSim.Data.MySQL.dll



    ;# {MuteListModule} {OfflineMessageModule:OfflineMessageModule} {} {} MuteListModule

    ;; Mute list handler (not yet implemented). MUST BE SET to allow offline

    ;; messages to work

    ; MuteListModule = MuteListModule



    ;# {MuteListURL} {OfflineMessageModule:OfflineMessageModule} {} {} http://yourserver/Mute.php

    ;; URL of the web service that serves mute lists. Not currently used, but

    ;; must be set to allow offline messaging to work.

    ; MuteListURL = http://yourserver/Mute.php



    ;; Control whether group invites and notices are stored for offline users.

    ;; Default is true.

    ;; This applies to both core groups module.

    ; ForwardOfflineGroupMessages = true





[ODEPhysicsSettings]

    ;# {mesh_sculpted_prim} {[Startup]physics:OpenDynamicsEngine} {Mesh sculpties so they collide as they look?} {true false} true

    ;; Do we want to mesh sculpted prim to collide like they look?

    ;; If you are seeing sculpt texture decode problems 

    ;; (messages such as "Decoded image with unhandled number of components: 0 shortly followed by a physcs exception")

    ;; then you might want to try setting this to false.

    ; mesh_sculpted_prim = true



    ;# {use_NINJA_physics_joints} {[Startup]physics:OpenDynamicsEngine} {Use jointed (NINJA) physics?} {true false} false

    ;; If you would like physics joints to be enabled through a special naming

    ;; convention in the client, set this to true.

    ;; (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics)

    ; use_NINJA_physics_joints = false





[RemoteAdmin]

    ;; This is the remote admin module, which uses XMLRPC requests to

    ;; manage regions from a web interface.



    ;# {enabled} {} {Enable the remote admin interface?} {true false} false

    ; enabled = false



    ;# {port} {enabled:true} {Port to use for the remote admin interface? (0 = default)} {} 0

    ;; Set this to a nonzero value to have remote admin use a different port

    ; port = 0



    ;# {access_password} {enabled:true} {Password for the remote admin interface} {}

    ;; This password is required to make any XMLRPC call (should be set as

    ;; the "password" parameter)

    ; access_password = ""



    ;# {access_ip_addresses} {enabled:true} {List the IP addresses allowed to call RemoteAdmin?} {}

    ;; List the IP addresses allowed to call RemoteAdmin

    ;; If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.

    ;; access_ip_addresses = 0.0.0.0, 0.0.0.0 ...

    ; access_ip_addresses =



    ;# {create_region_enable_voice} {enabled:true} {Enable voice for newly created regions?} {true false} false

    ;; set this variable to true if you want the create_region XmlRpc

    ;; call to unconditionally enable voice on all parcels for a newly

    ;; created region

    ; create_region_enable_voice = false



    ;# {create_region_public} {enabled:true} {Make newly created regions public?} {true false} false

    ;; set this variable to false if you want the create_region XmlRpc

    ;; call to create all regions as private per default (can be

    ;; overridden in the XmlRpc call)

    ; create_region_public = false



    ;# {enabled_methods} {enabled:true} {List of methods to allow, separated by |} {} all

    ;; enable only those methods you deem to be appropriate using a | delimited

    ;; whitelist.

    ;; For example:

    ;; enabled_methods = admin_broadcast|admin_save_oar|admin_save_xml

    ;; if this parameter is not specified but enabled = true, all methods

    ;; will be available

    ; enabled_methods = all



    ;; specify the default appearance for an avatar created through the remote

    ;; admin interface

    ;; This will only take effect is the file specified by the

    ;; default_appearance setting below exists

    ; default_male = Default Male

    ; default_female = Default Female



    ;; Update appearance copies inventory items and wearables of default

    ;; avatars. if this value is false, just worn assets are copied to the

    ;; Clothes folder; if true, all Clothes and Bodyparts subfolders are copied.

    ;; The receiver will wear the same items the default avatar did wear.

    ; copy_folders = false



    ;; Path to default appearance XML file that specifies the look of the

    ;; default avatars

    ; default_appearance = default_appearance.xml





[Wind]

    ;# {enabled} {} {Enable wind module?} {true false} true

    ;; Enables the wind module.

    ; enabled = true



    ;# {wind_update_rate} {enabled:true} {Wind update rate in frames?} {} 150

    ;; How often should wind be updated, as a function of world frames.

    ;; Approximately 50 frames a second

    ; wind_update_rate = 150



    ;; The Default Wind Plugin to load

    ; wind_plugin = SimpleRandomWind



    ;; These settings are specific to the ConfigurableWind plugin

    ;; To use ConfigurableWind as the default, simply change wind_plugin

    ;; to ConfigurableWind and uncomment the following.

    ; avg_strength = 5.0

    ; avg_direction = 0.0

    ; var_strength = 5.0

    ; var_direction = 30.0

    ; rate_change = 1.0



    ;# {strength} {enabled:true wind_plugin:SimpleRandomWind} {Wind strength?} {} 1.0

    ;; This setting is specific to the SimpleRandomWind plugin

    ;; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind.

    ; strength = 1.0





[LightShare]

    ;# {enable_windlight} {} {Enable LightShare technology?} {true false} false

    ;; This enables the transmission of Windlight scenes to supporting clients,

    ;; such as the Meta7 viewer.

    ;; It has no ill effect on viewers which do not support server-side

    ;; windlight settings.

    ; enable_windlight = false





[DataSnapshot]

    ;# {index_sims} {} {Enable data snapshotting (search)?} {true false} false

    ;; The following set of configs pertains to search.

    ;; Set index_sims to true to enable search engines to index your

    ;; searchable data.

    ;; If false, no data will be exposed, DataSnapshot module will be off,

    ;; and you can ignore the rest of these search-related configs.

    ; index_sims = false



    ;# {data_exposure} {index_sims:true} {How much data should be exposed?} {minimum all} minimum

    ;; The variable data_exposure controls what the regions expose:

    ;;    minimum: exposes only things explicitly marked for search

    ;;    all: exposes everything

    ; data_exposure = minimum



    ;# {gridname} {index_sims:true} {Enter the name fo your grid} {} OSGrid

    ;; If search is on, change this to your grid name; will be ignored for

    ;; standalones

    ; gridname = "OSGrid"



    ;# {default_snapshot_period} {index_sims:true} {Period between data snapshots?} {} 1200

    ;; Period between data snapshots, in seconds. 20 minutes, for starters,

    ;; so that you see the initial changes fast.

    ;; Later, you may want to increase this to 3600 (1 hour) or more

    ; default_snapshot_period = 1200



    ;; This will be created in bin, if it doesn't exist already. It will hold

    ;; the data snapshots.

    ; snapshot_cache_directory = "DataSnapshot"



    ;# {data_services} {index_sims:true} {Data service URLs to register with?} {} http://metaverseink.com/cgi-bin/register.py

    ; This semicolon-separated string serves to notify specific data services

    ; about the existence of this sim. Uncomment if you want to index your

    ; data with this and/or other search providers.

    ; data_services="http://metaverseink.com/cgi-bin/register.py"





[Economy]

    ;# {SellEnabled} {} {Enable selling for 0?} {true false} true

    ; The default economy module only implements just enough to allow free actions (transfer of objects, etc).

    ; There is no intention to implement anything further in core OpenSimulator.

    ; This functionality has to be provided by third party modules.



    ;; Enables selling things for $0.  Default is true.

    ; SellEnabled = true



    ;# {PriceUpload} {} {Price for uploading?} {} 0

    ;; Money Unit fee to upload textures, animations etc.  Default is 0.

    ; PriceUpload = 0



    ;# {PriceGroupCreate} {} {Fee for group creation} {} 0

    ;; Money Unit fee to create groups.  Default is 0.

    ; PriceGroupCreate = 0





[XEngine]

    ;# {Enabled} {} {Enable the XEngine scripting engine?} {true false} true

    ;; Enable this engine in this OpenSim instance

    ; Enabled = true



    ;; How many threads to keep alive even if nothing is happening

    ; MinThreads = 2



    ;; How many threads to start at maximum load

    ; MaxThreads = 100



    ;; Time a thread must be idle (in seconds) before it dies

    ; IdleTimeout = 60



    ;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal

    ;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",

    ;; "Highest")

    ; Priority = "BelowNormal"



    ;; Maximum number of events to queue for a script (excluding timers)

    ; MaxScriptEventQueue = 300



    ;; Stack size per script engine thread in bytes.

    ;; If you are experiencing StackOverflowExceptions you may want to increase this (e.g. double it).

    ;; The trade-off may be increased memory usage by the script engine.

    ; ThreadStackSize = 262144



    ;; Set this to true (the default) to load each script into a separate

    ;; AppDomain. 

    ;;

    ;; Setting this to false will load all script assemblies into the

    ;; current AppDomain, which will significantly improve script loading times.

    ;; It will also reduce initial per-script memory overhead.

    ;;

    ;; However, setting this to false will also prevent script DLLs from being unloaded from memory if the script is deleted.

    ;; This may cause an OutOfMemory problem over time when avatars with scripted attachments move in and out of the region.

    ;; Some Windows users have also reported script loading problems when AppDomainLoading = false

    ; AppDomainLoading = true



    ;; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op) 

    ;; co-op will be more stable but this option is currently experimental.

    ;; If moving from co-op to abort, existing script DLLs will need to be recompiled.

    ;; This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run  

    ;; or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/

    ;; One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile

    ;; Current valid values are "abort" and "co-op"

    ; ScriptStopStrategy = abort

    



    ;# {DeleteScriptsOnStartup} {} {Delete previously compiled script DLLs on startup?} {true false} true

    ;; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false

    ;; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the

    ;; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used

    ;; by scripts have changed.

    ; DeleteScriptsOnStartup = true



    ;# {DefaultCompileLanguage} {Enabled:true} {Default script language?} {lsl vb cs} lsl

    ;; Default language for scripts

    ; DefaultCompileLanguage = "lsl"



    ;# {AllowedCompilers} {Enabled:true} {Languages to allow (comma separated)?} {} lsl

    ;; List of allowed languages (lsl,vb,cs)

    ;; AllowedCompilers=lsl,cs,js,vb.

    ;; *warning*, non lsl languages have access to static methods such as

    ;; System.IO.File.  Enable at your own risk.

    ; AllowedCompilers = "lsl"



    ;; Compile debug info (line numbers) into the script assemblies

    ; CompileWithDebugInformation = true



    ;; Allow the user of mod* functions.  This allows a script to pass messages

    ;; to a region module via the modSendCommand() function

    ;; Default is false

    ; AllowMODFunctions = false



    ;# {AllowOSFunctions} {Enabled:true} {Allow OSFunctions? (DANGEROUS!)} {true false} false

    ;; Allow the use of os* functions (some are dangerous)

    ; AllowOSFunctions = false



    ;# {AllowLightShareFunctions} {Enabled:false [LightShare]enable_windlight:true} {Allow LightShare functions?} {true false} false

    ; Allow the use of LightShare functions.

    ; The setting enable_windlight = true must also be enabled in the [LightShare] section.

    ; AllowLightShareFunctions = false



    ;# {OSFunctionThreatLevel} {Enabled:true AllowOSFunctions:true} {OSFunction threat level? (DANGEROUS!)} {None VeryLow Low Moderate High VeryHigh Severe} VeryLow

    ;; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe

    ;; See http://opensimulator.org/wiki/Threat_level for more information on these levels.

    ;; We do not recommend that use set a general level above Low unless you have a high level of trust

    ;; in all the users that can run scripts in your simulator.  It is safer to explicitly

    ;; allow certain types of user to run higher threat level OSSL functions, as detailed later on.

    OSFunctionThreatLevel = VeryLow



    ; OS Functions enable/disable

    ; For each function, you can add one line, as shown

    ; The default for all functions allows them if below threat level



    ; true allows the use of the function unconditionally

    ; Allow_osSetRegionWaterHeight = true

    

    ; false disables the function completely

    ; Allow_osSetRegionWaterHeight = false

    

    ; Comma separated list of UUIDS allows the function for that list of UUIDS

    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb

    

    ; Comma separated list of owner classes that allow the function for a particular class of owners. Choices are

    ; - PARCEL_GROUP_MEMBER:  allow if the object group is the same group as the parcel

    ; - PARCEL_OWNER:         allow if the object owner is the parcel owner

    ; - ESTATE_MANAGER:       allow if the object owner is an estate manager

    ; - ESTATE_OWNER:         allow if the object owner is the estate owner

    ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb, PARCEL_OWNER, ESTATE_OWNER>, ...



    ; You can also use script creators as the uuid

    ; Creators_osSetRegionWaterHeight = <uuid>, ...



    ; If both Allow_ and Creators_ are given, effective permissions

    ; are the union of the two.



    ;# {EventLimit} {} {Amount of time a script can spend in an event handler} {} 30

    ;; Time a script can spend in an event handler before it is interrupted

    ; EventLimit = 30



    ;# {KillTimedOutScripts} {} {Kill script in case of event time overruns?} {true false} false

    ;; If a script overruns it's event limit, kill the script?

    ; KillTimedOutScripts = false



    ;# {ScriptDelayFactor} {} {Multiplier for scripting delays} {} 1.0

    ;; Sets the multiplier for the scripting delays

    ; ScriptDelayFactor = 1.0



    ;# {ScriptDistanceLimitFactor} {} {Multiplier for 10.0m distance limits?} {}

    ;; The factor the 10 m distances limits are multiplied by

    ; ScriptDistanceLimitFactor = 1.0



    ;# {NotecardLineReadCharsMax} {} {Maximum length of notecard line?} {} 255

    ;; Maximum length of notecard line read

    ;; Increasing this to large values potentially opens

    ;; up the system to malicious scripters

    ; NotecardLineReadCharsMax = 255



    ;# {SensorMaxRange} {} {Sensor range} {} 96.0

    ;; Sensor settings

    ; SensorMaxRange = 96.0

    ;# {SensorMaxResults} {} {Max sensor results returned?} {}

    ; SensorMaxResults = 16



    ;# {DisableUndergroundMovement} {} {Disable underground movement of prims} {true false} true

    ;; Disable underground movement of prims (default true); set to

    ;; false to allow script controlled underground positioning of

    ;; prims

    ; DisableUndergroundMovement = true



    ;# {ScriptEnginesPath} {} {Path to script assemblies} {} ScriptEngines

    ;; Path to script engine assemblies

    ;; Default is ./bin/ScriptEngines

    ; ScriptEnginesPath = "ScriptEngines"





[MRM]

    ;; Enables the Mini Region Modules Script Engine.

    ; Enabled = false



    ;; Runs MRM in a Security Sandbox

    ;; WARNING: DISABLING IS A SECURITY RISK.

    ; Sandboxed = true



    ;; The level sandbox to use, adjust at your OWN RISK.

    ;; Valid values are:

    ;; *  FullTrust

    ;; *  SkipVerification

    ;; *  Execution

    ;; *  Nothing

    ;; *  LocalIntranet

    ;; *  Internet

    ;; *  Everything

    ; SandboxLevel = "Internet"



    ;; Only allow Region Owners to run MRMs

    ;; May represent a security risk if you disable this.

    ; OwnerOnly = true





[FreeSwitchVoice]

    ;; In order for this to work you need a functioning FreeSWITCH PBX set up.

    ;; Configuration details at http://opensimulator.org/wiki/Freeswitch_Module

    ; Enabled = false



    ;; You need to load a local service for a standalone, and a remote service

    ;; for a grid region. Use one of the lines below, as appropriate

    ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini

    ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService

    ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector



    ;; If using a remote connector, specify the server URL

    ; FreeswitchServiceURL = http://my.grid.server:8004/fsapi





[Groups]

    ;# {Enabled} {} {Enable groups?} {true false} false

    ;; Enables the groups module

    Enabled = true



    ;# {LevelGroupCreate} {Enabled:true} {User level for creating groups} {} 0

    ;; Minimum user level required to create groups

    ; LevelGroupCreate = 0



    ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default

    ;; The default module can use a PHP XmlRpc server from the Flotsam project at

    ;; http://code.google.com/p/flotsam/

    ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse

    ; Module = Default

    ;; or... use Groups Module V2, which works for standalones and robust grids

    ; Module = "Groups Module V2"



    ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll} 

    ; StorageProvider = OpenSim.Data.MySQL.dll



    ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector

    ;; Service connectors to the Groups Service as used in the GroupsModule.  Select one as follows:

    ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector

    ;; -- for Simian Groups use SimianGroupsServicesConnector

    ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"

    ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"

    ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"

    ;; Note that the quotes "" around the words are important!

    ; ServicesConnectorModule = XmlRpcGroupsServicesConnector



    ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local

    ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote

    ; LocalService = local



    ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}

    ;; URI for the groups services of this grid

    ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc

    ;; or http://mygridserver.com:82/Grid/ for SimianGrid

    ;; or http:://mygridserver.com:8003 for robust, V2

    ;; Leave it commented for standalones, V2

    ; GroupsServerURI = ""



    ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {} 

    ;; Used for V2 in HG only. For example

    ;; http://mygridserver.com:9000 or http://mygridserver.com:8002

    ;; If you have this set under [Startup], no need to set it here, leave it commented

    ; HomeURI = "" 



    ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true

    MessagingEnabled = true



    ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule

    ; MessagingModule = GroupsMessagingModule

    ;; or use V2 for Groups V2

    ; MessagingModule = "Groups Messaging Module V2"



    ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true

    ;; Enable Group Notices

    NoticesEnabled = true



    ;# {MessageOnlineUsersOnly} {Module:GroupsModule Module} {Message online users only?} {true false} false

    ; Experimental option to only message online users rather than all users

    ; Should make large groups with few online members messaging faster, as the expense of more calls to presence service

    ; Applies Flotsam Group only. V2 has this always on, no other option

    ; MessageOnlineUsersOnly = false



    ;; This makes the Groups modules very chatty on the console.

    ; DebugEnabled = false



    ;; XmlRpc Security settings.  These must match those set on your backend

    ;; groups service if the service is using these keys

    ; XmlRpcServiceReadKey    = 1234

    ; XmlRpcServiceWriteKey   = 1234





[InterestManagement]

     ;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness Time Distance SimpleAngularDistance FrontBack} BestAvatarResponsiveness

     ;; This section controls how state updates are prioritized for each client

     ;; Valid values are BestAvatarResponsiveness, Time, Distance,

     ;; SimpleAngularDistance, FrontBack

     ; UpdatePrioritizationScheme = BestAvatarResponsiveness





[MediaOnAPrim]

    ;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true

    ;; Enable media on a prim facilities

    ; Enabled = true;





[NPC]

    ;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false

    ; Enabled = false





[Terrain]

    ;# {InitialTerrain} {} {Initial terrain type} {pinhead-island flat} pinhead-island

    ; InitialTerrain = "pinhead-island"





[UserProfiles]

  ;# {ProfileServiceURL} {} {Set url to UserProfilesService} {}

  ;; Set the value of the url to your UserProfilesService

  ;; If un-set / "" the module is disabled

  ;; ProfileServiceURL = http://127.0.0.1:8002





[Architecture]

    Include-Architecture = "config-include/phpGridServer.ini"